Sigma double jackpot bonus poker HELP!!!!

(1/2) > >>

number1duckfan:
Hello all

Someone gave me a sigma double jackpot bonus poker machine, when I turn it on I'm getting an error I tried to attached a picture of what the screen says but it wont let me, the screen says

rom no.or ver no. is different
turn on-off reset/sw
to use new program
old data in stock is cleared

Also I do not have keys for this, any help with getting  keys would be great Its a slant top- pt-2b

Thank you
John

Jim:
is the key a barrel or flat?    you could bypass the reset switch and get the game into the play mode.  with the power off,  remove the two wires that are on the reset switch (note there position, you will have to replace them after doing this)   take a paper clip and bend it so the two ends will connect the two connectors from the switch, wrap it with electrical tape so nothing is exposed and not touching any metal, close the door, turn on the machine for 5 sec.  then undo the bypass and put the wires back on the switch, hopefully this should have put you in the mode you need to be in.


Hope this helps

Jim     

number1duckfan:
Hi Jim

The key is a barrel not flat, So I tried connecting the reset wires, same thing comes up on the screen


Thanks
John

Jim:
the  other option to try the same thing with the door open.

another thing I would do on Sigma games was to change a setting on one of the dip switches, then when you power it up it knows you changed a setting and will ask to reset the machine for the new change to take effect,  then after you effect the change change it back to where it was and do the same procedure again.


Jim

number1duckfan:
Jim

I wanted to thank you, Today I played with the machine. I unplugged the reset wires while the top was open and the game was on, hooked a paper clip to them, as soon as I disconnected it the machine turned on, it works great. I think I got a good deal on it, paid $5 for the machine:)

John

do you know where I could get a cash box for a sigma slant top, I noticed the light on the bill accepter is on but it does not work. ( makes no noise when I turn the machine on )  Is that because its missing the cash box? 

Navigation

[0] Message Index

[#] Next page