|
Title: Bally Alpha Cinevision Post by: keystone9 on December 31, 2013, 12:22:09 PM Can any one tell me what type of JCM bill validator is used in a Bally Alpha Cinevision ? I have some games that I think have the wrong BV. Thanks. Bill.
Title: Re: Bally Alpha Cinevision Post by: Neonkiss on December 31, 2013, 12:39:07 PM UBA 10 with ID003 or if you use a WBA you will need a RS232 converter board installed on the side.
Title: Re: Bally Alpha Cinevision Post by: keystone9 on December 31, 2013, 02:23:04 PM Ahah. That's what I am missing on the WBA's, the converter board. I need to buy 4 WBA's with the converter board for the Alpha's. Thank you. Bill.
Title: Re: Bally Alpha Cinevision Post by: Neonkiss on December 31, 2013, 02:26:59 PM Or just buy the converter boards and plug them in.
Title: Re: Bally Alpha Cinevision Post by: keystone9 on December 31, 2013, 02:32:25 PM All of the games have IDO24 BV's in them.
Title: Re: Bally Alpha Cinevision Post by: FORDSBS on December 31, 2013, 02:36:02 PM 024 should be IGT. change chip for bally
Title: Re: Bally Alpha Cinevision Post by: keystone9 on December 31, 2013, 02:36:52 PM IT is Ford. And they are flashed.
Title: Re: Bally Alpha Cinevision Post by: FORDSBS on December 31, 2013, 02:40:36 PM 003 for bally.
Sounds like you have a lot of games. Have to find time to stop in. |