NEED HELP CODE 83 RAM ERROR

<< < (2/2)

vegasbaby:
HI
Thanks for you response.One quick question,What do you mean by put the jumper on the jw10 post.The slot that is marked jw10 has a small black plug,that could be pulled out easy,do i just remove that,then follow the rest of steps.
THANKS MARK

proten:
The black plastic plug is a jumper.
When you remove it you will see that it is on one of two pins.
You will put the jumper on the two pins and the follow the rest of the directions.
When done you will put the you will put the jumper back on the one pin till the next time you need it.

But make sure that you only remove and install the MPU board with the power off!!!

proten:
I sent you the manual for the S5500 slot.

 :172-

Navigation

[0] Message Index

[*] Previous page