LED chasing lights. IGT

(1/1)

rumjar86:
Hey guys. I have an issue with a IGT LED chasers topper ring that I can't find much details about them. I am after what the required voltage and if anyone has some idea of schematics would be even more of a help. the tag I have on it is
ASSY No. 75125201 REV A
it's from a MASH topper.
thanks
Josh

CommTech:

For IGT topper: Ring LED's are 12 VDC and the Back Light is 24 VDC.

therockinelvis:
orange and black/orange stripe =24 vdc
red and black/red stripe = 12 vdc

rumjar86:
does anyone have info on the part that is near the 12volt power pins, I am having issues trying to figure out what it is (1A 125W <LF> 460 ) I am thinking it is a resistor but am not sure. I think it may be the issue why I can't get the LED's to run. I have tried basic continuity tests and get no readings from that one part. every other resistor and diods work fine. please any advice would be greatly appreciated.

rumjar86:
just an update figured it out... it's a fuse..lol
so now the issue is do i replace it with another surface mount for now or try and solder a basic spade fuse holder on for testing.
any suggestions would be great

Navigation

[0] Message Index