|
Title: Paltronics Post by: tacman on September 19, 2008, 11:14:18 AM slottech69
Paltronics « on: March 30, 2006, 07:18:56 AM » -------------------------------------------------------------------------------- Does anyone have any information on the Paltronics Progressive system? result1 Re: Paltronics « Reply #1 on: June 16, 2006, 01:27:32 PM » -------------------------------------------------------------------------------- This is not Good - I see your posting (No one answered it) so its not looking good for my question Does anyone have documentation on Paltronics Progressive (One Link Media Systems)? It’s had to believe – spend over $9,000.00 on a system and they do not send documentation with it. A simple (How to connect and set up sheet). If anyone has it in a PDF format, I would appreciate if you could send it to me at Result1@cox.net If not – thank you anyway; I will give Pal tronics till Monday to give me a call back. Should be able to do it without a cheat sheet – Just like to make sure of the connections before I turn it on…. SLOTTEX MIKOHN « Reply #2 on: June 21, 2006, 07:25:00 AM » -------------------------------------------------------------------------------- WELL I GOT ALL OF WHICH WERE 6 PROGRESSIVES UP AND RUNNING THAT WERE ON EMPTY. THESE WERE ON THE SHELF. 2 UNITS ARE- MONO (E) 12c Micro (c)1992 MIKOHN V 7.21 cs 38 AAH & 1 = V 7.20 THESE ARE THE ONES YOU CAN PROGRAM MESSAGES IN! THE OTHERS ARE CH2 STA /V 141 & V 2.09 THESE ARE JACKPOT DENOMINATION ONLY. ALL WERE SHOWING EMPTY AND GOT THEM WORKING BY GOING TO #4 AND PRESSING F5 SDEM , THEN BACK TRACKING AND PUTTING MY SETTINGS IN. THANKS AGAIN FOR REPLYS DANNY I ALSO HAVE 4 BALLYS AND 2 IGT THAT ARE PROGRESSIVES AND ALL ARE CH2 AND NOT CH2+ AND I DON'T HAVE A CON 1 OR 2. Jay Re: Paltronics « Reply #3 on: June 21, 2006, 10:55:23 AM » -------------------------------------------------------------------------------- On the Cham1s that are denomination only.... that is a matter of changing a dipswitch. The SDem is Send Demo is it not vs F1 send Messages ..... JPOT.DO Pal Guy Re: Paltronics « Reply #4 on: February 05, 2007, 07:37:12 PM » -------------------------------------------------------------------------------- For anyone that reads this Paltronics is very easy to reach and will provide any information needed on all our products. I am the National Service manager and you can reach me direct at shawn.mcintire@paltronics.com I can provide anyone with documents or technical support. I am somewhat new to this site and i missed the chance to respond to this request. Please contact me with any new requests. Thanks Also check out the web site at www.paltronics.com |