Welcome, Guest. Please login or register.
May 20, 2024, 04:39:13 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  1989 IGT SpinTil You Win- How Do I Remove Cover From Motherboard?		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: 1989 IGT SpinTil You Win- How Do I Remove Cover From Motherboard?  (Read 2864 times)
pclisa71
Guest
« on: April 20, 2011, 11:57:03 PM »
I have a 1989 Bally Spin Til You Win Slot Machine. Does anyone know how to take off the metal protector case from the motherboard? I need to change the lithium battery that is on the motherboard. Thank you.

* slotmachine.jpg (62.54 KB, 480x640 - viewed 264 times.)
« Last Edit: April 21, 2011, 10:19:31 PM by pclisa71 » Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Online Online

Gender: Male
Posts: 5489


Kevin
« Reply #1 on: April 21, 2011, 12:17:27 AM »
Welcome to the site!

 NLG Welcome


As far as I know, Spin 'Til You Win was an IGT theme, unles Bally copied it?  If you could post a picture of your machine and/or the board in question, one of our members will be able to better help you.
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
AnotherTech
Guest
« Reply #2 on: April 24, 2011, 03:27:33 AM »
That looks like an IGT to me.  The board needs to slide back toward the rear of the machine about 1/2" and then it lifts up.  They can be a bit of a pain to pull and to put back in.  Pulling the hopper first gives you more room to work.
Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Online Online

Gender: Male
Posts: 5489


Kevin
« Reply #3 on: April 24, 2011, 08:20:36 AM »
I agree, now that you've added a picture to your post.  It looks like an IGT S+ with a side-mounted MPU board.

With the power off, remove the hopper (it should just slide straight out towards you).  Then, you can remove the MPU board by simply lifting straight up on the black knob on the silver metal tray that holds the board.  The board will slide up about a half an inch towards the top of the machine (not towards the back of the machine), then can be removed by pulling it to the right slightly to get it out of its track.

Do you have an error 12 on the display?  If so, then yes, the battery on the board needs to be replaced.  If not, you likely don't have a low battery situation.
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
AnotherTech
Guest
« Reply #4 on: April 25, 2011, 02:01:50 AM »
Sorry, my mistake on the direction.  It's been a while since I've worked on those.  Silly Me!
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.13 seconds with 19 queries.