|
Title: Mic board will not reset to default. Post by: vertigouno on June 26, 2009, 06:35:39 AM Hi i have a ballys 6000 (old School) its a quickhits so it has 2 progressives the one on the game and the Paltronics. Well every time someone hits the top progressive (paltronics) it goes into a hand Pay.
it should actually print the ticket and reset to Default. but its not working so we need to reset it manually from the BSK. Any ideas Guys. sorry about my english. :103- :99- Title: Re: Mic board will not reset to default. Post by: PalGuy on July 15, 2009, 04:04:27 PM Need a little more information on your Paltronics system to be able to help you.
First what version software is on you PAL193 interface card and what version of software is in your BSK100. You can get the version from the touchscreen on the BSK. Next do you have the Opto in the correct position and right side up? If you can answer these questions I should be able to help you. Also I did an install manual for the 6000 and can email it to you if you need it. Thanks. Shawn Mc Intire Senior Solution Support engineer paltronics. Title: Re: Mic board will not reset to default. Post by: thanh lieu on December 20, 2012, 11:25:16 PM Hi mate,
Can One link BSK 04-1112 link to SEI PAL45 ASP5000 protocol? I am currently using JPC ASP5000 protocol with epprom config Regards, camthanh1974@hotmail.com Title: Re: Mic board will not reset to default. Post by: PalGuy on December 20, 2012, 11:30:03 PM You would need to email our office in Australia to see if they can help you
|