|
Title: Bally 5000+ coin mechanism problem Post by: actionpaintball on October 30, 2012, 01:06:00 AM I finally got my bally 5000+ powered up after a fresh power supply. I can't get a coin to register, just drops through to the tray. After looking at the coin mechanism, I am now thinking that there may be some missing parts? Unfortunately I have no other slots to compare it to and cannot find any good pictures. Could anyone help me out and see if something is missing from the pics?
Title: Re: Bally 5000+ coin mechanism problem Post by: actionpaintball on October 30, 2012, 01:10:04 AM A couple more pics
Title: Re: Bally 5000+ coin mechanism problem Post by: actionpaintball on October 30, 2012, 01:48:58 AM I have a coin now placed in the validator...still same issue.
Title: Re: Bally 5000+ coin mechanism problem Post by: tucsondirect on October 30, 2012, 07:29:50 AM what does the display show?
Title: Re: Bally 5000+ coin mechanism problem Post by: actionpaintball on October 30, 2012, 01:33:12 PM Display does not change at all. The "rake" just pulls the coin to the tray. I did remove the rake (assembly and solenoid) and flop it to the side and the machine plays and pays. So I am assuming is the comaparitor??? The only one bad thing the rake removal causes is; the machine only takes a max of 2 coins....If you accidently put a 3rd coin in with the rake disabled, it throws an error. It's OK for a temp bandaid fix, but I want to try and get the machine back 100%. I will keep messing with it and possibly end up buying a caparitor, but want to try my best to trouble shoot it. I am also getting an occasional #2 reel spin error irregular reel spin. I am going to pull and clean everything and see if that helps.
|