IGT I-game(triple bucks)

[Technicalmayhem]

  hi, hopefully someone has some insight for me, my IGT Triple Bucks upright keeps on resetting when you go into settings after a ram clear, it gets halfway through the settings then goes to the startup screen,when it gets to the keychip menu again all ur settings u have done is still there and the process repeats, have replaced the gmeproms aswell as the base eprom, also replaced the mpu board and the power supply.wtf.

[brianfink]

Just wondering do you hear a pop when it resets I actualy had a moniter that would pop and cause the whole machine to reset

[Technicalmayhem]

Nope, Haven't heard a pop from the monitor yet, but think it might be worth swapping out the monitor. will let you know. thank you.

[Buzz]

Are you sure the touch screen isn't so far out of calibration that when you touch one thing the touch screen thinks you touched something else,

[Technicalmayhem]

The monitor is not the culprit, its working fine and is calibrated 100%. what else you got?

[Technicalmayhem]

let me explain, the machine is up and running now, the monitor isn't resetting nor the machine right now, this only seems to happen when you do a ram clear on it-when your busy in the keychip menu it resets while you are busy doing the settings, after it restarted it goes back to your keychip menu and your previous settings are still there and the process repeats until you are done with the settings and exit the keychip menu to go to game. weird. haven't seen this on another I.G.T.