|
Title: Game Maker vertical hold won't hold Post by: mkraus01 on December 24, 2010, 06:45:52 PM I have an upright Game Maker and can't get the vertical hold to hold. the adjustment seems ultra sensitive and I just can't get it adjusted properly to hold. I pulled the mini circuit board with all the pots on it, cleaned it with electrical cleaner/degreaser and no change. I measured the resistance of the vertical hold pot and it was from 600 ohms to 190k ohms. Anyone have any ideas how I can fix this? It looks like there is a nice area of adjustment on the horizontal hold where it is stable for about 1/8 turn of the pot, but not so on the vertical hold.
Any ideas would be greatly appreciated! -Mike Kraus |