Welcome, Guest. Please login or register.
May 12, 2024, 07:17:17 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Bally S 6000 91NC error		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally S 6000 91NC error  (Read 11684 times)
clown2948
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 92
Offline Offline

Gender: Male
Posts: 360
« on: June 08, 2009, 10:48:58 PM »
Hi I need some information on how to get rid of the 91 NC error. I did a safe ram clear and everything is alright but when I close the door and the reels spin than I get a 91 code. What should I be doing to get rid of that code.
Logged
cp
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 165
Offline Offline

Posts: 423
« Reply #1 on: June 08, 2009, 11:51:02 PM »
Simple interpretation:   91 NO communication.    What's the game you're working on ?    Also... check the voltage on the 3.6V  Lithium battery on the MPU / game board.
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #2 on: June 09, 2009, 12:12:36 AM »
Is this a progressive machine?

W
Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
clown2948
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 92
Offline Offline

Gender: Male
Posts: 360
« Reply #3 on: June 09, 2009, 12:59:42 AM »
Hi it is a Double 777 Jackpot. I dont think it is a progressive jackpot machine. I jumped a new battery on the board so do i need to redo a safe ram clear again.
Logged
clown2948
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 92
Offline Offline

Gender: Male
Posts: 360
« Reply #4 on: June 10, 2009, 12:54:08 AM »
Hi I still need help in getting past the error code.I know what the error is but I no not know how to get past it. I have a Bally Manual but it does not tell you how to get rid of it and to set the game up again. Any help would be great . If this was a progressive machine than how do I change it back .Thanks guys.
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #5 on: June 10, 2009, 02:33:09 AM »
If you perform a complete saferam clear the settings should revert back.

Thanks,
Wayne
Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
clown2948
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 92
Offline Offline

Gender: Male
Posts: 360
« Reply #6 on: June 10, 2009, 09:08:04 AM »
Hi to do a complete safe ram clear you remove the U28 and U43 chip install the clear chips turn on the machine hold the two buttons down till you get the clc. I did that and I get a 04.21 in the win paid section. That is to set time and date correct.Than when I push the red button I get 91 NC error code.What did I do wrong.
Logged
stormrider
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 131
Offline Offline

Gender: Male
Posts: 772
« Reply #7 on: June 10, 2009, 09:20:06 AM »
Quote from: clown2948 on June 10, 2009, 09:08:04 AM
Hi to do a complete safe ram clear you remove the U28 and U43 chip install the clear chips turn on the machine hold the two buttons down till you get the clc. I did that and I get a 04.21 in the win paid section. That is to set time and date correct.Than when I push the red button I get 91 NC error code.What did I do wrong.

When you are doing the ram clear did you remember to do the DS1 switch 8
also you might want to post the mains you have and the clear chips.
Logged
clown2948
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 92
Offline Offline

Gender: Male
Posts: 360
« Reply #8 on: June 10, 2009, 09:30:48 AM »
I found out what I was doing wrong. I had to change the dip switch setting on ds1 to on-on-off-off-off-off-off-on. Than I had to set time and date. Everything is find now. Thanks Mopar69. I sold my 1970 cuda last year. I had a 340 six pack with a four speed.
Logged
KirkLasVegas
Retired OLD Buzzard
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 1104


Newest addition to the family, RIP Bentley
« Reply #9 on: July 12, 2009, 06:48:49 PM »
I had that on this machine when I dragged it home. it has a small serial comm port that plugs into the FRONT of the CPU shelf! Was not plugged in.

i'm still alive guys, been SUPER busy and not working on the collection much at all these days. This one begged to go home with me, had to do it...

* CIMG2099.JPG (618.83 KB, 1280x960 - viewed 406 times.)

* CIMG2097.JPG (623.02 KB, 1280x960 - viewed 312 times.)
Logged
Definition of "Retirement"= to be able to get back all you contributed into it AND take some of their money too before dropping dead.
uniman
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 695
Offline Offline

Gender: Male
Posts: 1830
« Reply #10 on: July 12, 2009, 07:05:45 PM »
Nice game Kirk. I've played that game several times in Laughlin and even though it always took all of my money, I kept going back for more punishment!   rotflmao
Never hit a good one.  bawling

What percent payout does your machine have?
Logged
tacman
NLG Document, Media Gallery and FAQ Writer
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 446
Offline Offline

Gender: Male
Posts: 1537


Genius in training.
« Reply #11 on: July 12, 2009, 07:07:20 PM »
Nice find Kirk, I think that's a Bally/Barcrest? conversion.

 Dan (tacman)
Logged
KirkLasVegas
Retired OLD Buzzard
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 1104


Newest addition to the family, RIP Bentley
« Reply #12 on: July 12, 2009, 07:13:40 PM »
Thanks!
Here is the chipset, don't know what the payout is on it. It was in "Sam's Town" Casino here in Las Vegas.
Also a Pic of the serial cable that sometimes gets tucked away, causing the 91nc error.

* CIMG2100.JPG (634.83 KB, 1280x960 - viewed 661 times.)

* CIMG2101.JPG (645.2 KB, 1280x960 - viewed 445 times.)
Logged
Definition of "Retirement"= to be able to get back all you contributed into it AND take some of their money too before dropping dead.
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #13 on: July 13, 2009, 06:53:28 PM »
Just to note along with the cable you need to have the dip set for the bouns topper on the main board.  If not the top will not sync up with the main board.

Also the right mains are important for this game.

Also the top is Acers I think not barcrest.
Logged
paul
paul
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 548
« Reply #14 on: July 25, 2009, 01:43:54 PM »
Heres another one same type of game  I get a 50 code put in new optics same 50 code so i jumped the door switch got rid of 50 code but got a 55 code changed out switch on stacker door and no change I take jumper out and get 50 back  wayne have you run across this before stumped in ohio
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #15 on: July 25, 2009, 02:10:51 PM »
Quote from: paul on July 25, 2009, 01:43:54 PM
Heres another one same type of game  I get a 50 code put in new optics same 50 code so i jumped the door switch got rid of 50 code but got a 55 code changed out switch on stacker door and no change I take jumper out and get 50 back  wayne have you run across this before stumped in ohio
Hi paul
  I'm on my cell,  the bv door would give a 52 so not that. Once you got rid of the 50 and had 55 you just need to get the bv to initialize properly (55) , make sure the cash can is in good.

I have a lot of posts to go through when I get home

Thanks,
Wayne
« Last Edit: July 27, 2009, 12:02:37 AM by a69mopar » Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
paul
paul
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 548
« Reply #16 on: July 26, 2009, 11:45:14 PM »
Does anyone know where to get a manual on these top units for the ballys I got all other codes clear except the top unit has a E001 I checked wiring from mpu to top unit and all is well
Logged
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #17 on: July 27, 2009, 12:04:37 PM »
Quote from: paul on July 26, 2009, 11:45:14 PM
Does anyone know where to get a manual on these top units for the ballys I got all other codes clear except the top unit has a E001 I checked wiring from mpu to top unit and all is well
The issue is you need to set the MPU board (CPU) dip switches for over the top bonus.    Was this a new board or one from a different game?  

and I assume you have the little connector on the front of the MPU board plugged in as I think you noted?

I also remember something about having to have the correct manins but could be wrong on that.
Logged
paul
paul
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 548
« Reply #18 on: July 27, 2009, 12:21:39 PM »
This is the board that came with machine bottom plays fine but there is no bonus Scratch Head
Logged
paul
paul
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 548
« Reply #19 on: July 27, 2009, 12:29:02 PM »
When you ram clear does the plug have to be in the mpu board from the top unit
Logged
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #20 on: July 27, 2009, 12:43:35 PM »
Here are the dips and the plug does not matter when clearing

DS1 - Secondary Device Protocol

DIP Switch DS1
   System SW4 SW5 SW6
Anchor 1.6 OFF ON ON

Bally Secondary Game (BSG) OFF ON OFF  <<<<********* I think it's this one that tells it to talk to the top

Secondary Device (SED)1 ON OFF ON

Switch Game Function

SW3 Bonusing
ON No bonusing
OFF Bonusing enabled *****  << I am not sure about this one
Logged
paul
paul
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 548
« Reply #21 on: July 27, 2009, 07:42:23 PM »
Slotmaster it worked everything is working I think i would have had a hard time figuring that out  thanks again applause wave Hail
Logged
tacman
NLG Document, Media Gallery and FAQ Writer
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 446
Offline Offline

Gender: Male
Posts: 1537


Genius in training.
« Reply #22 on: July 27, 2009, 08:23:51 PM »
Hey Paul, glad you got it going. I know Dave and Dick had some problems with some of theirs and would probably know the fix! K+

 Dan (tacman)
Logged
paul
paul
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 20
Offline Offline

Gender: Male
Posts: 548
« Reply #23 on: July 27, 2009, 11:55:04 PM »
That one would have taken a wile to figure out thanks for your help to Dan
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.137 seconds with 20 queries.