Welcome, Guest. Please login or register.
May 17, 2024, 11:54:12 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  IGT Fortune 1 Sircoma/Poker.
| | |-+  Fortune I 		0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Fortune I  (Read 4004 times)
white47
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 2
« on: November 11, 2009, 12:58:08 AM »
Bought a Fortune I Poker machine off craigslist, powers up but just lines on the screen.  I also have no key, just wanted to check with the experts before drilling out the lock if there is a better way to get the machine open.  Once open, where is a good starting point to begin troubleshooting.

Thanks

Ron
Logged
Belbtech
New NLG Member 1 to 100 Post
**

Total Karma Storms: 42
Offline Offline

Posts: 86
« Reply #1 on: November 11, 2009, 05:42:59 AM »
You might try;

http://newlifegames.net/nlg/index.php?topic=255.0

Good luck & God bless,
Mike><>
Logged
For God so loved the world...John 3:16!
Jim
MIDWEST SLOTS
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 288
Offline Offline

Gender: Male
Posts: 1172


513-984-2201
« Reply #2 on: November 11, 2009, 12:57:06 PM »
Ron      I would recommend cutting off the lock opposed to drilling. I have broken too many drill bits and dulled the same.  Some locks have hardened pins placed in the area's you would think it is the easiest to drill.

the easiest way to cut one off:  use a single hacksaw blade, hold it with your hand, and just make a 1/16 starter grove on the top side of the outer ring, then place a few strips of duct tape around the lock area, ( this is to minimize the scratching effect on the chrome)  then  using a sawsall with a hacksaw blade cut thru the lock,  push the housing thru the hole and move the lock bar with your finger and open the machine, sounds like alot of work, but should only take five minutes provided you have the tools.

Good luck, hope this helps

Jim
Logged
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma.
reho33
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 1594


Slot Losers of America / Tokie Owens
« Reply #3 on: November 11, 2009, 12:59:30 PM »
It might be more expensive but a locksmith might get it open, take the lock, and make a proper key for you. It will not be cheap but the machine won't be ruined either. Just a thought.
Logged
** NOTE: The information contained in any of my posts relating to slot machine ownership and use is information that I have gathered from publicly known sources correspondingly under the same protections of Free Speech governed under the Laws of the United States and Canada and is for informational use only. As is my Constitutional Right under United States and Canadian Laws the redistribution of said information is considered a form of free speech. Using this information in the United States or Canada to conduct illegal gambling in states/provinces where it is unlawful has been declared against the law in those states/jurisdictions and as such I do not advocate the illegal use of such information under both the United States and Canadian Laws. All references and examples of personal experiences are hypothetical in nature, and it is up to you to determine if the information presented is applicable to your situation or not**
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #4 on: November 11, 2009, 02:47:21 PM »
I have used a plain high-speed router with a metal cutting bit...
I adjusted the bit so that the router sat on
some blue painters tape placed around the lock and
just trimmed 1/16" off the top of the lock...
All the guts of the lock was simply pushed right through
to the inside of the machine and the door opened!
Logged
reho33
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 1594


Slot Losers of America / Tokie Owens
« Reply #5 on: November 11, 2009, 03:58:52 PM »
I like that Mark, K+ for that idea!
Logged
** NOTE: The information contained in any of my posts relating to slot machine ownership and use is information that I have gathered from publicly known sources correspondingly under the same protections of Free Speech governed under the Laws of the United States and Canada and is for informational use only. As is my Constitutional Right under United States and Canadian Laws the redistribution of said information is considered a form of free speech. Using this information in the United States or Canada to conduct illegal gambling in states/provinces where it is unlawful has been declared against the law in those states/jurisdictions and as such I do not advocate the illegal use of such information under both the United States and Canadian Laws. All references and examples of personal experiences are hypothetical in nature, and it is up to you to determine if the information presented is applicable to your situation or not**
cp
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 165
Offline Offline

Posts: 423
« Reply #6 on: November 11, 2009, 04:43:34 PM »
Another idea on opening locked doors...get a pair of Vise Grips.  I  you can get a "grip"  on the outside/extended lock barrel, give it a good turn back / forth.  Sometimes this creates a little movement of the inner cam .... enough to allow entry.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.117 seconds with 19 queries.