|
Title: nex gen bench set up Post by: plowboy77 on June 17, 2010, 11:00:31 AM :103- Greetings all. I am wanting to get started troubleshooting and repairing some of our nexgens. My manager and I tried to set up some components on my bench to get a display going but failed. Can anyone tell me if I can or what I need to get a set up going? I just want to get a display going for now. Any advice on test equip would be appreciated also. Thanks in advance.
Title: Re: nex gen bench set up Post by: stayouttadabunker on June 17, 2010, 11:31:04 AM Make a Frankenstein Tester outta an old nexgen cabinet! :89-
Title: Re: nex gen bench set up. What am I doing wrong? Post by: plowboy77 on June 23, 2010, 11:03:15 AM What am I doing wrong? I have the 18V ac that we use plugged into the adapter cable to the BE II P1 power in that says 24 vac/dc. I have a nexgen plugged into P2, Nexgen cabled to a card reader and a harness plugged into the BE II slot machine interface. I even plugged the J1: to BE II P6 jumper hooked up. But the harness is not connected to anything. I don't have any experiance with egd's. I'm learning from the slot techs here. (tryng to). Do I need to hook up anything to the interface cable? I do have a compact flash in the nex gen.
Title: Re: nex gen bench set up Post by: TZtech on June 23, 2010, 01:09:48 PM Hi
Have you tested the parts you are using on the floor ? Even if there is no comms to a server your LCD should still come up. Ian Title: Re: nex gen bench set up Post by: plowboy77 on August 11, 2010, 01:27:58 PM FIGURED IT OUT. :3-I was only using the small part of the BEII to display harness. Did not realize the long part is cross connected. :25-
|