need help with a blown resistor on a cc16

(1/2) > >>

Flyinryan26:
any help or if you can supply me one the same as this would be greatly appreciated.. 

have blown a resistor and doesnt give a value on it and the color tape has blown off...

also need a loom from the 12pin molex to the cc16 cable and to the optics in the door etc...

tkrozleski:
Is it a 24 volt AC or DC? Is it for Bally or IGT?

What position is the resistor labeled/designated on the board label? R17 ? If so R17= 75 ohm

At the top of the home page is a "NLG File System Download" tab, in there is schematics for all the comparitors

Flyinryan26:
Its a cc16 24v m8.. not sure if thats the only problem I'm having coz the loom attached to it has a lot of cuts and joins in it... thanks so much for ur help been stuck on this machine for nearly a year...  :-(   n im not that great with electronics so wat does r17 mean dummys version.... thanks m8

stayouttadabunker:
That resistor is a 100k at 5%
The color bands are gold, brown, black, brown where the gold band means 5%.

Foster:
The correct way to state resistor colors is first digit, second digit, multiplier, tolerance.

a 100K ohm 5% would be brown black yellow gold
a 100   ohm 5% would be brown black brown gold

Navigation

[0] Message Index

[#] Next page