Welcome, Guest. Please login or register.
May 23, 2024, 04:16:22 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Bally E-Series - Reels Spining and not Stopping (E Series 2207)		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally E-Series - Reels Spining and not Stopping (E Series 2207)  (Read 1951 times)
JimMay3
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Male
Posts: 23
« on: December 04, 2012, 10:49:54 PM »
I have a probmatic problem with and Bally E-Series 2207 nickel machine; when it plays, it plays great, but seems to struggle on power up at times.

When off for a few days, it boots up fine, put a coin in, spins good, but just never stops spinning.  Open it up, check all connectors and remove reel assy, play around for about 30 minutes and then it just works?

Any help is apprciated...

Scratch Head
Logged
tkrozleski
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 23
Offline Offline

Gender: Male
Posts: 308
« Reply #1 on: December 04, 2012, 11:17:36 PM »
Sounds like it needs the entire reel assembly lubed.

What is your error codes on the display?
Logged
JimMay3
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Male
Posts: 23
« Reply #2 on: December 04, 2012, 11:21:14 PM »
???  It spins good, just not firing the solenoids on boot up all the time.  Sometime it works right away, other times you pull the handle and it will spin forever and not stop each reel.

No Codes displayed.
Logged
Amachanic
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 308
Offline Offline

Gender: Male
Posts: 1392
« Reply #3 on: December 04, 2012, 11:58:54 PM »
Check the white plug on the power supply behind the hopper on the back wall.. Check that connection for burnt connectors. The solder joints on the power supplys pins tend to have hair line cracks causing problems too.. One other thing i have noticed with the Bally E-Series machines is that they don't like operating in temps of 65 degrees and below?

Gary
Logged
If it's jammed, force it... If it breaks it needed to be replaced anyway...
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.071 seconds with 18 queries.