Welcome, Guest. Please login or register.
May 18, 2024, 01:08:48 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Battery modification		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Battery modification  (Read 3688 times)
fiero1988gt
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 35
« on: January 10, 2013, 08:05:31 PM »
My Bally 6000 machine had an 8100 error code which means low battery.  As everyone knows this causes the machine to require a new battery and then clear chips and a lot of fooling around to get back to square one from when the machine was working.  The battery fails quickly because as a personal owner of the machine I have it on a power bar and shut the power bar off when not in use.  The Casino never shuts the machine off because a machine which is turned off never makes any money.
To over come loosing power from the battery and having to do a clear ram I have mounted two batteries in parallel external to the mpu board.  I removed the original lithium battery from the board and run an positive and negative wire external to the board to two double A single battery holders.  I wired these two battery holders to the positive and negative wire in paralled and installed a new lithium battery into each of the holders.  Now I can periodically check the voltage and when it starts to get low I chan change one battery at a time without loosing the memory.  This will be worth my time and effort.  Pictures of my project attached. The battery holders are attached with velcro.      fiero1988gt

* Copy of DSC08947.JPG (456.74 KB, 640x480 - viewed 296 times.)

* Copy of DSC08948.JPG (433.96 KB, 640x480 - viewed 284 times.)
Logged
fiero1988gt
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 35
« Reply #1 on: January 10, 2013, 08:06:33 PM »
The other two attachments

* Copy of DSC08950.JPG (318.96 KB, 640x480 - viewed 300 times.)

* Copy of DSC08953.JPG (351.92 KB, 640x480 - viewed 300 times.)
Logged
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« Reply #2 on: January 10, 2013, 10:39:09 PM »
Great idea and solution, will have to do that on my Bally machines. Thanks for sharing! applause
Logged
CVslots
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 432
Offline Offline

Gender: Male
Posts: 2803



WWW
« Reply #3 on: January 11, 2013, 02:00:52 AM »
Wow fiero....nice solution for a pain in the butt problem! Good job!
Logged

www.CentralValleySlots.com
Email: centralvalleyslots@yahoo.com
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #4 on: January 11, 2013, 03:18:03 AM »
Actually a mod almost the same thing was done on this site a long time ago. The reason I said almost is as I recall they used (3) 1 1/2 volt battery's and a resistor, Again as I recall if you change the battery with the machine turned on NO settings are lost.  This was/is Stat Freaks pride and joy on his Bally's.

http://newlifegames.net/nlg/index.php?topic=148.0 
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
DF777
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 40
Offline Offline

Gender: Male
Posts: 60
« Reply #5 on: January 13, 2013, 11:47:59 AM »
That was a great idea, Fiero. I made some minor changes and I think I will leave just 1 battery in and change it out when it gets low.

* IMG_0801.JPG (809.33 KB, 1600x1200 - viewed 312 times.)

* IMG_0800.JPG (533.89 KB, 1600x1200 - viewed 322 times.)
Logged
slotsteve
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 1980


we are opened a home sale store on us 58
« Reply #6 on: January 13, 2013, 12:48:11 PM »
Quote from: Buzz on January 11, 2013, 03:18:03 AM
Actually a mod almost the same thing was done on this site a long time ago. The reason I said almost is as I recall they used (3) 1 1/2 volt battery's and a resistor, Again as I recall if you change the battery with the machine turned on NO settings are lost.  This was/is Stat Freaks pride and joy on his Bally's.

http://newlifegames.net/nlg/index.php?topic=148.0 
[/quotei have been getting ballys with battery off mpu for past 2 years    like bu buzz it,s been around a long time , done same to pinball boards  the shack has holders for around a buck
Logged
fiero1988gt
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 35
« Reply #7 on: January 14, 2013, 06:23:05 PM »
SlotSteve--That is a nice modification and thanks for your pics as well.  I also appreciate the info from Buzz.  I never thought about being able to change the battery while the machine is powered up.  Because of that reason we only realy need one battery in one holder if we make sure to change the battery while the machine is powered up.  I like the idea of only one battery rather than the three batteries and the diode.  Less chance of making a mistake and the batteries are cheap on e-bay.  I was able to pick up ten batteries for the price of $15 no tax and no shipping.  They came from Isreal which is where they are manufactured.  They arrived at my house in Canada within six days.  I have now ordered the safe clear chips and after they arrive I hope to have my machine up and running again.  I appreciate all the help and excellent info on this board.
Logged
Frank A
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 50
Offline Offline

Gender: Male
Posts: 274


Pinball & Sailing
« Reply #8 on: January 15, 2013, 05:04:15 PM »
If you change the 3 AA batteries on a pin game when it is powered up you don't lose your settings too.
Logged
Frank A
Wallgames
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 12
« Reply #9 on: February 21, 2013, 10:16:04 PM »
One of the modifications I routinely make to Bally pinball MPU boards (e.g., AS-2518-17) is to replace the battery with a 5.5v 1.5F capacitor.  This retains the memory nicely, without the corrosion problems batteries introduce.

Has anyone successfully attempted this type of modification on a Bally 5000 Plus board?

-Bob Carroll
Wallgames.com

Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.128 seconds with 19 queries.