Welcome, Guest. Please login or register.
May 04, 2024, 09:38:28 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  setting progessive up		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: setting progessive up  (Read 6675 times)
slotsteve
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 1980


we are opened a home sale store on us 58
« on: July 20, 2013, 10:13:53 PM »
I have 2 bally 6000 both have progressives  1 flashes c1 and$000. the other works great  both have same wires  in same places  , what to I need to do to set the one that's not working?
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #1 on: July 20, 2013, 10:21:03 PM »
First check battery on progressive. Then you need to hookup to psp to setup.
Logged
slotsteve
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 1980


we are opened a home sale store on us 58
« Reply #2 on: July 20, 2013, 10:24:14 PM »
psp?
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #3 on: July 20, 2013, 10:27:02 PM »
It's the program you install in your computer . Need cable to run from computer to Mikohn to set it up.
Logged
slotsteve
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 1980


we are opened a home sale store on us 58
« Reply #4 on: July 20, 2013, 10:31:29 PM »
this is 1st time I had to set up a progressive I have no program, all were working when I pluged them in can I try changing black box I have many extras
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #5 on: July 20, 2013, 10:36:35 PM »
I'd say swap one out. Hope has correct pay on progressive hit.
Logged
slotsteve
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 1980


we are opened a home sale store on us 58
« Reply #6 on: July 20, 2013, 10:39:02 PM »
I,ll do nit sunday thanks for help pal
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #7 on: July 20, 2013, 10:42:37 PM »
Anytime Steve. I don't know much but help what I can.
Logged
4 Deuces
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 698
Offline Offline

Posts: 1090
« Reply #8 on: July 21, 2013, 03:14:39 AM »
I wonder if you could just try using the buttons on the Mikohn and verify that it's set for SA?  C1 is a communication error between the display and the machine, so it may be a simple setting with the display's configuration.  There are two buttons that get you into the 3 menu's, one of which if for making sure it's set to Stand Alone progressive (SA).  :Dave
Logged
slotsteve
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 1980


we are opened a home sale store on us 58
« Reply #9 on: July 21, 2013, 10:14:04 AM »
I can not get buttons to get me in menu  is there a trick?
Logged
lindam1
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 168
Offline Offline

Gender: Male
Posts: 858


When you're out of Quarters, You're done.
« Reply #10 on: July 21, 2013, 10:51:15 AM »
Steve,
Next to the 2 buttons is a switch, you have use the switch to enter programing mode.
Logged
If it ain't broke....Stop trying to fix it.
slotsteve
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 1980


we are opened a home sale store on us 58
« Reply #11 on: July 21, 2013, 11:59:08 AM »
I just found that switch  , now  what do I do? Silly Me!
Logged
lindam1
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 168
Offline Offline

Gender: Male
Posts: 858


When you're out of Quarters, You're done.
« Reply #12 on: July 21, 2013, 12:23:02 PM »
Steve,

Here's some stuff that will help,

In the Standalone configuration the CHAMII+ controls the jackpot amounts and the amounts displayed on the in-machine displays for a particular machine. The CHAMII+ receives coin-in data from the machine connected at J7 (Machine Interface Port), increments the jackpot values, and displays those amounts on the in-machine displays connected at J2 and J3. Also the CHAMII sends jackpot amounts back to the machine via the machines Link 485 (J14 back plane) to be displayed in the bookkeeping meter 08.

Mikohn CHAMII+ Configurations:

Menu Items – ADDR, DISP, and SYST

ADDR:
Protocol  (PROTO) = CON2
Group Address (GRADR) = 255
ID Address (IDADR) = 1
Router Address (RTR ADDR)= OFF (unless the CHAMII+ connects to a Mikohn SUPERLINK system.
Machine ID (M ID) = Available only if the protocol is set to CASLNK
Machine ADDR (MACH ADDR) = 1

DISP:
Jackpot Limit (JPLIMIT) = No
# Of displays (# DISPLAYS) = 1
Jackpot Group (JP GRP) = SA
Meter File (MFILE) = 4
Odometer Speed (ODSPEED) = default
Font = FLIP18
Size = 60

SYST:
Used to test various system components. OFF is the default value and the TEST function must be set to OFF for the CHAMII+ to function properly.

Notes:
   For the Linked Combo Configuration you will use both the PSP Software and the CHAMII+ switches to configure the controller and the CHAMII+ settings respectively.
   The CHAMII+ logic board must be in configuration mode to change any of its settings.
   Display must be hooked up to J2 to for configuration.



Here's more for the machine (11d) menu

11D

02= 0005 if 0004 is used you get 91 error
07= 001
78lL= 001

Try this stuff first. Do you a laptop with PSP on it, and the cable for programing the Cham II?
Logged
If it ain't broke....Stop trying to fix it.
slotsteve
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 1980


we are opened a home sale store on us 58
« Reply #13 on: July 21, 2013, 12:30:05 PM »
I,ll give it a try   this is 1st one I had that wasn,t working when I pluged it in  I changed black box hoping other one had  right stuff on it
thanks
steve
Logged
lindam1
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 168
Offline Offline

Gender: Male
Posts: 858


When you're out of Quarters, You're done.
« Reply #14 on: July 21, 2013, 12:46:55 PM »
Steve,

Are you getting an error code on the machine like 91 or a "C" error?
Logged
If it ain't broke....Stop trying to fix it.
slotsteve
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 1980


we are opened a home sale store on us 58
« Reply #15 on: July 21, 2013, 12:48:23 PM »
only thing I get on display is c1 and 0.00
Logged
lindam1
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 168
Offline Offline

Gender: Male
Posts: 858


When you're out of Quarters, You're done.
« Reply #16 on: July 21, 2013, 12:57:27 PM »
check the machine settings in "11d" menu

2=4 or 5 whatever works (Serial Multiplex progressive interface)
7=1  (# of external jackpots)
78LO=1  (machine address)
Logged
If it ain't broke....Stop trying to fix it.
slotsteve
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 1980


we are opened a home sale store on us 58
« Reply #17 on: July 21, 2013, 01:06:55 PM »
I,ll try those  my # 7 was set on 2 and  #2 is set on 5
Logged
lindam1
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 168
Offline Offline

Gender: Male
Posts: 858


When you're out of Quarters, You're done.
« Reply #18 on: July 21, 2013, 01:08:42 PM »
Try the 02 on 0004
Logged
If it ain't broke....Stop trying to fix it.
lindam1
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 168
Offline Offline

Gender: Male
Posts: 858


When you're out of Quarters, You're done.
« Reply #19 on: July 21, 2013, 01:10:50 PM »
The C1 tells me something in the Cham II is not set right. go the the list of setting I sent you and see if they match.
Logged
If it ain't broke....Stop trying to fix it.
slotsteve
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 1980


we are opened a home sale store on us 58
« Reply #20 on: July 21, 2013, 01:11:50 PM »
will do waiting on boss to print out you  setting you sent for top unit  , I don,t touch her printer
Logged
slotsteve
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 139
Offline Offline

Gender: Male
Posts: 1980


we are opened a home sale store on us 58
« Reply #21 on: July 21, 2013, 08:10:48 PM »
I get c10 amd0.00 now on display
Logged
lindam1
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 168
Offline Offline

Gender: Male
Posts: 858


When you're out of Quarters, You're done.
« Reply #22 on: July 21, 2013, 09:09:39 PM »
that is a setting in the cham II unit. you're gona have to use PSP
Logged
If it ain't broke....Stop trying to fix it.
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.09 seconds with 19 queries.