|
Title: Condor Coin Mech Problem Post by: tacman on September 19, 2008, 10:32:31 PM kenokarz
condor coin mech problem « on: September 20, 2007, 09:29:14 PM » -------------------------------------------------------------------------------- my aristocrat mark 5 has a condor coin mech does any body know how to set these it has a green light on the back , also a dial of some kind it says . 25 cent but will not accept .25 cent or tokens need help on these one looked for some info but could not find any short of throwing it as far as i can i thought i would ask thanks cdlale Re: condor coin mech problem « Reply #1 on: September 21, 2007, 01:16:24 PM » -------------------------------------------------------------------------------- Check your Email. I hope its the right one. Thanks kenokarz Re: condor coin mech problem fixed « Reply #2 on: September 22, 2007, 07:14:11 AM » -------------------------------------------------------------------------------- thanks to cdlale for the manual and steve at slot brokers these guys are right on the ball it works like a charm here is how you set up a condor coin mech 1 - place dial to 0 coin mech out of machine but still plugged in and power up machine led should be green i had to do this only because my dial was on the back side with no way to get to the dial if installed, 2- turn dial to 1 and press the programing button led should turn red. 3- feed the type of coin in to the accepter until the led start to flash green this should happen between 4 and 6 coins now press the program button once more the led should turn green , 4- turn dial back to 0 and your up and running THAT WAS EASY |