Help with CDS Razzel dazzel battery

(1/4) > >>

drfreeze1739:
Hello...

have a quick qestion.

i have a CDS Razzel dazzel

The battery on the board showed 0v

so i replaced the battery with a new 3.6v battery and it comes up with battery low.

and the new battery showes 0v with it on the board but when you pull off the new battery off the

board it reads 3.6v.....

any one can help or any sugestions????

Thank you...

paul:
clear the machine see if that works

drfreeze1739:
I dont have the birthing chips to do a complete Clear on the machine.

Is there any other way to clear it with out the chips?

CVslots:
I seem to remember there was something about a "one chance" gig....in which you turned the reset key FORWARD, not backward. Once you pass it once, you're done, and need the birthing chips.

paul:
turn the reset key toward the front of machine that should bring up menu press spin or bet max to go thru menu and see if initilaze in some abreveation comes up like init or intl  with the door open wide if you get initial in some form press bet one to start initializing and then follow prompts on door if you cant get to that screen you need birth chips if so look on door when you first turn on machine and it will tell you the version no  like 2.12  or 2.05 ect  my memory is just not what it was       Paul

Navigation

[0] Message Index

[#] Next page