|
Title: wms 550 w/nxt board Post by: bhinkley on April 19, 2013, 10:10:26 PM I am wondering if anyone knows the pin out for the aux power connector on the NXT board for the wms 550. I have a machine that did not come with the connection cable in it, and I believe it is causing an issue. At random times the machine will just reboot itself. It happens most frequently at the end of a bill validator cycle. Any help would be appreciated.
Title: Re: wms 550 w/nxt board Post by: spooksab on June 27, 2013, 03:16:43 PM see attached file
Title: Re: wms 550 w/nxt board Post by: yjam on October 15, 2013, 07:25:51 PM you might check the voltage on your power supply
Title: Re: wms 550 w/nxt board Post by: rickhunter on October 15, 2013, 10:31:02 PM The absence of the aux power will cause reboots. The PDF below details which cables to re-route to the 6 pin molex aux power on NXT board.
|