Welcome, Guest. Please login or register.
June 02, 2024, 03:48:11 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  WMS WILLIAMS. (Moderator: tacman)
| | |-+  * Interesting * 550 "Problem"		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: * Interesting * 550 "Problem"  (Read 6471 times)
KirkLasVegas
Retired OLD Buzzard
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 1104


Newest addition to the family, RIP Bentley
« on: March 24, 2010, 08:19:58 PM »
I wanna share this one with the group.
This one bit me in the ass bigtime!!!
On the upright 550 it has a cover over the logic box. Said cover activates a push-switch. No big deal..read on....
So I say to myself, why bother with this annoying door! simply put a piece of tape over the switch and set aside the piece of scrapmetal.
Well....got news for ya!
It seems the 550 logic is rather "smart" and KNOWS the switch wasnt tripped.It then starts to act bitchy.First off it WONT RUN!
It might "clear" but it acts strange! after I went thru 3 boards not booting including the one that I KNEW worked I got wondering.
First thing, I blamed the 24C04 EEPROM on the backplane...WRONG!
Seems "Bypassing" the logicdoor switch is a "kiss of death". DO NOT DO THIS!
While it doesnt damage anything, the throwing of the machine across the room WILL do severe damage to it and the tile floor (no,I didnt kill it).
So put up with the stupid door,it will save sheet metal,tile floors and a lot of hair.....

Kirk
Logged
Definition of "Retirement"= to be able to get back all you contributed into it AND take some of their money too before dropping dead.
bunnyslots
Senior Full time Member.
NLG Member 101 to 500 Post
*

Total Karma Storms: 1006
Offline Offline

Gender: Male
Posts: 351
« Reply #1 on: March 24, 2010, 09:23:07 PM »
Kirk
I do the exact same thing with my 550 converted to a cpu/nxt and the only problem so far is when the tape slips off the machine gives a call attendent error,  I sure hope I'm not messing anything up
Logged
Railroad94
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 225
Offline Offline

Gender: Male
Posts: 585
« Reply #2 on: March 24, 2010, 11:22:50 PM »
Darn Kirk, sounds like a little bad luck.  Had a 1.5+ and a NXT conversion board in a 550 and just have the wires off the switch (open) and no problems.
Do you have the main door switch wired and working ?
Logged
tacman
Topic Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 446
Offline Offline

Gender: Male
Posts: 1537


Genius in training.
« Reply #3 on: March 24, 2010, 11:28:25 PM »
Ron, sounds like your 550 is on its last leg. You can give it to me at the show before it really screws up!  bust gut laughing

 Dan (tacman)
Logged
Inieas
Of all the things i have lost I miss my mind the most
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 54


Keeping the years down is hard, but staying young
« Reply #4 on: September 18, 2010, 03:33:11 AM »
Hi Kirk,

Funny enough when I read through the forums looking for a problem on one of my WMS 550 machines, I came across yours. I tried switching the machine off, opened the cage and started the machine and found that if the MPU door stays closed and the machine is switched off and back on it seems to reboot itself over and over. When I opened the door and started it, it started fine. i am definitely going to want to fix this, so if you managed to get your solved, would you mind sharing? I will investigate further on my part.

Thanks
Logged
If I cant fix it, I will find a way or bug someone till they tell me how!
Inieas
Of all the things i have lost I miss my mind the most
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 54


Keeping the years down is hard, but staying young
« Reply #5 on: October 21, 2010, 03:30:02 AM »
Has anyone had a solution to this problem yet? I have 2 WMS 550 machines doing the same thing. I have replaces all boards and was wondering if it could be the memory module?
Logged
If I cant fix it, I will find a way or bug someone till they tell me how!
rickhunter
SMAA Founder and Chairman
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 226
Offline Offline

Gender: Male
Posts: 1456


I Void Warranties
« Reply #6 on: October 22, 2010, 01:42:39 PM »
If you have replaced all boards, the memory is not an issue as the memory is on the 1.5 board.  Have you tried swithing out the power supplies?
Logged
A slot collector is like a coin hopper in a machine that never pays out.  they just keep on accumulating assets.
Inieas
Of all the things i have lost I miss my mind the most
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 54


Keeping the years down is hard, but staying young
« Reply #7 on: November 15, 2010, 08:26:58 AM »
Hi All,

I have found that 2 Caps on The PSU caused the problem.

Thanks
Logged
If I cant fix it, I will find a way or bug someone till they tell me how!
rickhunter
SMAA Founder and Chairman
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 226
Offline Offline

Gender: Male
Posts: 1456


I Void Warranties
« Reply #8 on: November 15, 2010, 03:40:57 PM »
 applause applause applause

Glad you could find your answers here.
Logged
A slot collector is like a coin hopper in a machine that never pays out.  they just keep on accumulating assets.
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #9 on: November 15, 2010, 04:41:38 PM »
So....the problem with Kirk's machine is his caps on his power supply are failing?
Which 2 caps do you mean Inieas ?  Scratch Head 3
Thanks for helping out a bunch of WMS guys with dying power supplies!  applause
Logged
Inieas
Of all the things i have lost I miss my mind the most
New NLG Member 1 to 100 Post
**

Total Karma Storms: 2
Offline Offline

Gender: Male
Posts: 54


Keeping the years down is hard, but staying young
« Reply #10 on: April 10, 2011, 11:47:26 AM »
Hi Guys,

Cant remember which exactly, got distracted with atleast 300 or so other machines after, I will pull the PSU sometime soon and check for everyone.....
Logged
If I cant fix it, I will find a way or bug someone till they tell me how!
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.097 seconds with 19 queries.