adding back lit reels question

[cowboygames]

Now you're only seconds away from seeing the light(s). Backlit reel lights that is

[coorslight115]

actually days They won't be here until Tuesday. Just doing my reasearch     Thanks All

Now off to play with the key chip that came today to get it out of coinless mode

[Buzz]

Hope it was a key 31 !!!!!!!!!!!!

[Yoeddy1]

Not a port key or a Horcrux (for the Harry Potter fans). 

[coorslight115]

Hope it was a key 31 !!!!!!!!!!!!

Yes it was Buzz, how did you know ?? PS burner adapter arrived today.

[coorslight115]

Thsi could be a new topic...but I won't go there ...YET

Just cleared all credits off the machine and used my new Key chip. to enable the coin mode. All went well. Put $5 in the machine and played for 10 minutes. I guess a Key chip has the same powers as a clear chip in an S-Plus. you hit all the jackpots after using one. Look below

[cowboygames]

My Tabasco hit for 900 right after I put the backlit reels in. They like it when we treat them well

[stayouttadabunker]

The weird thing is when I put in a 4XPay game in mine -
I hit like the 3rd highest payout in a few spins.
I flipped the accounting key and saw that the machine's
current % rate was like around -137%...negative!  

[Buzz]

Figure this one out   I was testing the machine when it hit this one.  I still can't figure out why it payed 11 thousand credits.

[coorslight115]

Ok first glitch, Before I dive in I will ask   On boot up after the key, I get netplex stating printer #2 installed and the printer will no longer print. It will advance a paper in the printer test. and the bezel is lit and flashing rapidy. First guess would be to remove it , disable it and boot. Then install and enable it and reboot. Am I close?

[Buzz]

I'm not sure, I don't think I've ever saw ( seen which is it ) a number before printer. Did you enable the printer when you did the first key??  I don't think you said you did a clear, maybe it's something the casino had in the machine.

http://newlifegames.net/nlg/index.php?topic=9845.msg86190#msg86190

Tim read this thread it works !!!!!!!!

[Brianzz]

Figure this one out   I was testing the machine when it hit this one.  I still can't figure out why it payed 11 thousand credits.

That's easy...

9 X 60 X 20 = 10,800 (3X 3X Triple 7)
3 X 5 X 20 =       300 (3X any 7)
Total Win:      11,100

The other odd 300 credits come from any 2 3X symbols on a line, I can't make out the payline numbers in the paytable

[coorslight115]

I'm not sure, I don't think I've ever saw ( seen which is it ) a number before printer. Did you enable the printer when you did the first key??  I don't think you said you did a clear, maybe it's something the casino had in the machine.

http://newlifegames.net/nlg/index.php?topic=9845.msg86190#msg86190

Tim read this thread it works !!!!!!!!

Didn't have to go that far... validation was set to enhanced, set it to system and the printer works fine. All is good now, just waiting for the reel kit to arrive

[coorslight115]

Reel kit arrived today 

15 minutes and 0ne beer  start to finish and they work great   

Thanks all for the help.


and here is a link to LaSlots new ebay name and listing . he has a few kits lefts for others. Includes everything needed.

http://cgi.ebay.com/IGT-S2000-LIGHTED-REEL-CONVERSION-KIT-/110615070398?pt=LH_DefaultDomain_0&hash=item19c12c06be

[cowboygames]

 

[dpalmi]

In case you missed the thread or have forgotten let me WARN you not to install LED lights behind the coin ledgen ( center reel glass ) or as a BV bezel light. If you do smoke will appear. Trust me been there done that. Besides they look like crap.

Really?  I have LED lights in my coin/denomation legend and 2 in my BV bezel....no smoke.  Do you have a link to the thread?  Anyone else using LED lights in these spots?

Dan #2

[Buzz]

Dan  A pic is worth a thousand words.  Yours truly and a LED did this to this board.  I'll try to find that post for you tomorrow.

[Foster]

I am using LED's in my BV Bezel not in the denom light (looks like a spot light behind denom with LED)
I do have the WBA Sentry installed instead of the standard bezel so the LED's only illuminate the Bill Entry.

[StatFreak]

As Buzz showed me, the issue is that those sockets have two long copper tabs that each cover one full flat side of the base of the bulb. Some LEDs (not all) have two wires that each wrap around both sides of the base. Some are designed so that each wire wraps up on only one side.

If you insert the type of LED whose wires wrap around both sides of the base you will short out the socket and fry the seven segment board. Those LEDs are tiny and they all tend to look alike, so unless you're VERY careful as to which type you're inserting (or you clip the second side of the leads on an offending LED before using it) you WILL fry something.