Welcome, Guest. Please login or register.
May 06, 2024, 01:30:57 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  2000 D.O.A.		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: 2000 D.O.A.  (Read 8962 times)
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« on: May 30, 2011, 12:41:14 AM »
Hi all. I have an S2000. Has been working fine. Turned on all I had was florescent lights, Bill acceptor light & all lights on MPU  & topper
lights flashing real fast. Did some checking so changed power supply. Turned on and all came on & started to boot up. I turned to go to
computer to start looking for power supply when it made one hell of a noise, ALL went dead & that dam burnt smell. Now she's
totally dead. I guess I fried this Power supply also. Any advice where I should start looking for problem ?
Hope to get @ it tomorrow night. Trying get info before I start.
Thanks in advance for any help.
Ford

 Burning Resistor Burning Resistor Burning Resistor
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #1 on: May 30, 2011, 12:49:22 AM »
Ford, have you done any changes/alterations to the machine lately? Anything at all in the last couple weeks before it happened? All your cooling fans working ok?
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #2 on: May 30, 2011, 12:55:08 AM »
Quote from: cowboygames on May 30, 2011, 12:49:22 AM
Ford, have you done any changes/alterations to the machine lately? Anything at all in the last couple weeks before it happened? All your cooling fans working ok?

Didn't make any changes & cooling fan was working. I've been using this for about 6 Mo.
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #3 on: May 30, 2011, 01:02:49 AM »
Have you pulled the MPU to check for signs of damage? Like what Bunker just had, look at all the chips for obvious signs of damage. Next would be to look at peripheral boards like the meter board and I/O boards for the same thing, check for exposed/shorted wires, that type of thing. Finally, unplug tenet plugs and reinstall one at a time till game won't boot. Just some ideas, but it'll help narrow things down
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #4 on: May 30, 2011, 01:08:33 AM »
Thanks cowboy. After it took a crap I didn't do any more. I thought I'd pick you guys brain until I get back @ it tomorrow night.
That is good advice you have. I guess first thing should do is pull power supply & put in another machine & see if it burned out.
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #5 on: May 30, 2011, 01:15:13 AM »
Definately check that Ford, just don't put that MPH in anything else till you know it's safe  yes Or any of the peripheral boards for that matter. There sure have been a lot of member S2000s taking a crap lately. Self destruct signal from the mother ship maybe? rotflmao rotflmao
Logged
reho33
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 1594


Slot Losers of America / Tokie Owens
« Reply #6 on: May 30, 2011, 03:23:20 AM »
No, probably the age of the machine. Most machines are 2000 to 2007 so they would be 4 to 11 years old now. I don't know what the MTBF (Mean Time Between Failures) would be for the PS but some hit it , some crap out way before. Mine went in that way about a month ago but it was a much older version made in 2000 so 11 years later, it left................... I wonder if a computer power supply could be used but it probably does not have the required voltages.
Logged
** NOTE: The information contained in any of my posts relating to slot machine ownership and use is information that I have gathered from publicly known sources correspondingly under the same protections of Free Speech governed under the Laws of the United States and Canada and is for informational use only. As is my Constitutional Right under United States and Canadian Laws the redistribution of said information is considered a form of free speech. Using this information in the United States or Canada to conduct illegal gambling in states/provinces where it is unlawful has been declared against the law in those states/jurisdictions and as such I do not advocate the illegal use of such information under both the United States and Canadian Laws. All references and examples of personal experiences are hypothetical in nature, and it is up to you to determine if the information presented is applicable to your situation or not**
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #7 on: May 30, 2011, 01:19:46 PM »
I agree with you Reho...
Most of these power supply units were on 24/7 on 'live" floors in casinos at one time.
They are hobbling at best and way past into their golden age years now.  Tongue Out
Though many PS's can be re-built via re-capping and bring new life into them -
many homeowners lack the know-how to perform this.

The Randy Fromm video posted up in another similar thread
has some very good clues how to do this though... yes
It would be better if he had someone to hold the video camera for him though..lol
I don't know if he's ever heard of a tripod?  Tongue Out
Robert Sult's notes on Power Supplies are very good too... yes
Many board schematics are included as well.
« Last Edit: May 30, 2011, 01:28:30 PM by stayouttadabunker » Logged
reho33
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 146
Offline Offline

Gender: Male
Posts: 1594


Slot Losers of America / Tokie Owens
« Reply #8 on: May 30, 2011, 02:34:27 PM »
I was going to do that for the one that I have but it is a really early version and does not have that board in the middle. I could re-cap but that may not do it. I did not see any caps on my board that were "bulged" or that had deformities. But hey, maybe I will just go for it. But a regulator may be out, etc. I also do not have the plug for a test (120V) like Randy has in the video, I guess there is a part # for that plug?
Logged
** NOTE: The information contained in any of my posts relating to slot machine ownership and use is information that I have gathered from publicly known sources correspondingly under the same protections of Free Speech governed under the Laws of the United States and Canada and is for informational use only. As is my Constitutional Right under United States and Canadian Laws the redistribution of said information is considered a form of free speech. Using this information in the United States or Canada to conduct illegal gambling in states/provinces where it is unlawful has been declared against the law in those states/jurisdictions and as such I do not advocate the illegal use of such information under both the United States and Canadian Laws. All references and examples of personal experiences are hypothetical in nature, and it is up to you to determine if the information presented is applicable to your situation or not**
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #9 on: May 30, 2011, 02:51:40 PM »
I don't know the part number for that Molex but I think he's only using 3 wires (+/-/Gnd) .
Should I come up with a Molex/pins part numbers -  will post it here.
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #10 on: May 30, 2011, 04:48:42 PM »
What kind of fuse does the power supply take. Can't see any # on it & there is paper over it so you can't see inside.
I know it's blown. So it would not screw it up I put a 1.5 amp & it popped. Has to be a short somewhere.
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #11 on: May 30, 2011, 05:11:43 PM »
Ford read this thread might help. http://newlifegames.net/nlg/index.php?topic=1988.msg14955#msg14955


Hows your Wife ????????????
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #12 on: May 30, 2011, 05:21:54 PM »
Quote from: Buzz on May 30, 2011, 05:11:43 PM
Ford read this thread might help. http://newlifegames.net/nlg/index.php?topic=1988.msg14955#msg14955

Thanks. I'll read.


Hows your Wife ????????????

Wife is OK. Got pins in ankle. It was broke @ 3 places. I told her you guys wished her good luck.
Thanks for asking, Ford
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #13 on: May 30, 2011, 08:03:37 PM »
I'm going to take EVERYTHING apart go over all.
I put a 3 amp fuse in Power Supply. Hooked up without cover so I could see what happened.
About 6 or 8 places on board sparks flew until fuse blew. There is a dead short somewhere.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #14 on: May 31, 2011, 12:53:46 AM »
ooh...that's NOT good fordsbs.
Time to shop for another one.
Is it an Autec power supply like in Randy Fromm's video?
I had mine apart last weekend and checked out that "white" fuse.
( It was good)
I wish I would have seen what it was rated for... Silly Me! Duh!
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #15 on: May 31, 2011, 01:11:09 AM »
Ford   The link I posted #7   If you test your Power Supply that way and it smokes a little bit, you will know it's junk. If it passes the test the short has to be in the machine and you will smoke a new PS.     I think I have this correct ??    Scratch Head Scratch Head
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #16 on: May 31, 2011, 12:52:38 PM »
 Thanks I found another power supply. I'm going to strip everything out of machine & see if I can find problem before I put in another PS & it.
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #17 on: June 03, 2011, 02:08:56 PM »
Thanks to Raz410.  Thank You!
Raz got me fixed up with these parts.
I hope I have what I need. Going to strip out wire's & change all & go from there.
All I have to do is remember where the wires go.
I think I will learn something here.
Ford
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #18 on: June 03, 2011, 02:11:14 PM »
here's what I got.

* 100_0520.JPG (877.61 KB, 2048x1536 - viewed 200 times.)
« Last Edit: June 04, 2011, 12:20:54 AM by FORDSBS » Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #19 on: June 03, 2011, 02:18:27 PM »
wow! You even have the harnesses that goes up to the topbox hole! Cool!!!  Cool Thumbs-Up
Most of these guys only pull out the boards and scrap all the hard-to-get harnesses!
I've seen other guys that only own a pair of pliers.... no
Raz is really a very good vendor - I've gotten some parts & kits from him I'm very happy with!  yes
I really like the way he uses bubble wrap as opposed to those bloody styrofoam peanuts!!!!
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #20 on: June 03, 2011, 02:20:08 PM »
When you tell Raz what you want he fixes you up.
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #21 on: June 04, 2011, 03:56:08 PM »
I HAVE POWER. Only problem after boot up comes up, call attendant -closure b -door open M - coin denomination unknown
Belly door is jumped.
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #22 on: June 04, 2011, 04:03:42 PM »
Ford after you got "call attendant", did you open the door and turn the jackpot key ??
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #23 on: June 04, 2011, 04:10:37 PM »
Quote from: Buzz on June 04, 2011, 04:03:42 PM
Ford after you got "call attendant", did you open the door and turn the jackpot key ??

yep. Goes to menu, close door  - same 4 things come up
Logged
OhioGaming
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 297
Offline Offline

Posts: 834



WWW
« Reply #24 on: June 04, 2011, 04:24:23 PM »
Run a key chip in it to set the denom.
Logged
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.094 seconds with 19 queries.