New Life Games Tech Forums

have bally 6000
diamonds /devils
when in bonus round all pays  go to tickets for each and every hit
if ticket are empty they go to hand pay
in reg game they go on meter
all setting are set right changed mains
did clears
also 1 member here told me setting 63  had something to do with  payout my setup skips 63  goes 62 to 78 hi
dip switch wrong??
thanks

Do you have 27 set on3?

Ford,
Now you're got my attention. Why 27 on 3?

1 is credit to game
3 is coin to credit

It worked on my D & D

That's bizarre, my 27 is this


0001  Credit Game
0002  Player Selectable
0003  EuroCredit

Your manual is different than mine

heres my setting  not listing 00
27=3
26=1
9=4
11=1
47=1
50h=1
50l=1
54=8000
78l=1
51=8500
58=8000
61=2
67=8001
77 a/b/c all on 1
68=1

mine are
27=3
26=1
9=4
11=1
47=1
50h=1
50l=1
54=8000
78l=1
51=9999
58=9999
61=2
67=9999
77 a/b/c all on 1
68=1

could it be something in dip  switch settings? also what mains you  using?

8812 chips

switch #1
1-0n
2-on
3-off
4-0n
5-0n
6-0n
7-on
8-on
  switch #2
1-off
2-off
3-0n
4-off
5-on
6-off
7-off
8-on

switch #3
all on

I,ll check those in morning thanks

Steve, How you making out with it?

I gave up for now working on alphas and cashlines , could take it anymore

When you decide to scrap it let me know.

I will not scrap it its a very nice game, I think my eproms might be wrong  or mains

When you get back @ it I'll try & help you however I can.

I,ll see you at the show before I go back to it ,

OK. If there anything that you think will help you with it let me know. I can bring to show for you.

Steve,
Just for giggles try setting 67 to 0000. That tells it to never print a ticket. see what happens.

when I stop tickets it goes to hand pay on every hit in bonus round  but I,ll try that anyway I would love to sell this game ,boss already cleaned it now I hear shit for not getting it on truck

The settings I gave Steve are what mine is set @ without TITO & all work. Have mine working-bill acceptor-printer-TITO

I used your setting, still the same ford that why I think program or mains

Your a good man, if you don't have it figured till show if you want I'll bring copy of mine.

please do 

Will do. Your mains should be OK since your printer works.

any thing else control where pays go?

Not that I can think of. As I said earlier mine worked like your game. I had 27 set to 1. I set 27 to 3 & it worked.
If I think of anything else I'll let you know. This old brain might be missing something.

dumb question. On your MPU the coin mech switch is up?

Steve, I just stuck a set of mains and personality chips for this game in the mail to you. You should have them Monday. Get that game on the truck and make Kate happy...   :88- :88-

When you get that working make sure you have the chip in JT1 on right rear lower on mother board for progressive to work.

thanks all,  funny  thing we sent a vision monitor to texas from here va  mon afternoon and the guy got it weds afternoon , and we sent it the cheapest way to save buyer money  , post office offer kate 2 day shipping for 100 bucks  we took the 28 buck shipping and it got there in 2 days

Well, I'm not smarter than a 5th grader. My Diamonds & Devils was working for the last year. I thought I had it figured out. Thursday I started getting 88's on it. Did partial clear & ok. This happened 2 times. Thought I'd pull chips & clean sockets. After had to do a clear & setup. Could not find cheat sheet for that game. Put setting back to what I'm sure I had & now I have same problem as Steve. Now I have something to work on this weekend. Just what I needed.

See below..........that Aint broke thing.

thanks we needed that , but mine started off broke

 :279- :279- :279- This game is noted for this problem. When I got mine it was the same as Steve's problem. I got it working & THOUGHT it
was the 27-3 setting. Once again I must have been wrong. Maybe now I'll find the real problem & what I did that made it work before.

its ok to be wrong once a year ford

Good luck to both of you. I wish I could be more help. If I think of anything you'll hear from me.

I'm past my limit.


Thanks, Are you going to York show?

Thanks, Are you going to York show?
[/quote]

I had planned to, but I may have an out of town issue on the 10th. Now it's up in the air. will know the middle of this coming week.

I've been @ this thing all day. Tried setting about every different way possible, other chips, other MPU, installed in another cabinet.
Has to be something with setting that I'm missing. It's a 3 reel with 10 bonus spins. Any ideas other than give it to bunker?

Steve, I did not find problem yet. Hope someone else had this problem that can help us.
Tried setting about every different way possible, other chips, other MPU, installed in another cabinet.
Has to be something with setting that I'm missing. It's a 3 reel with 10 bonus spins.

here's problem from Steve
have bally 6000
diamonds /devils
when in bonus round all pays  go to tickets for each and every hit
if ticket are empty they go to hand pay
in reg game they go on meter
all setting are set right changed mains
did clears

today is jukebox Monday we have boxes going in auctions sat , tue back to slots

Hope I'll have it working when you get back on slot's. What pisses me off is I know it worked.

very true

Ford,

Here's a thought (probably Dumb) does the machine concider the ten free spins as an external game. I think that that setting is on DS1 SW 4,5,&6

Thanks, something to look @. I'm going to go over dip switch setting & jumpers tonight to make sure I didn't move some when I cleaned board.

Tried DS1-4,5&6. Get 91 error. Tried some more setting combinations & back to step 1.  :103-
For me it's no big deal because I'm running TITO. I'd like to get it figured out for Steve.

any luck ford?   I got new chips today still same ,  lunch break  over wife has whip out back to work

Sorry Steve, no luck. I tried a lot of different things. I know it worked before sure don't know what happened or what changed. I'm
not giving up. When I think of something else to try will try.

we load truck next weds  so we have time

I'll try & find problem before then. Don't know what to try next. You would think someone on here other then us would have had this problem.
I know it has to be a simple thing in settings. I'll keep trying.