Welcome, Guest. Please login or register.
May 28, 2024, 10:15:59 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Bally 1208 TILT error		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally 1208 TILT error  (Read 1597 times)
rainman
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 10
Offline Offline

Gender: Male
Posts: 38
« on: September 28, 2012, 09:45:18 PM »
Need help with a Bally 3 reel 6 quarter model E-1208-18. It had a bad MPU board that I got replaced (thanks Barry Fox for the board and all your help) and I had a bad reel read that I got replaced as well (thank's Gary  “Amechanic”  for the replacement and your help) .

The machine plays while running test #8 (the Game functional Test). When I go to normal run which for this machine has be “50 000” in the win meter as soon I pull the handle and the reels spin don’t stop and it goes to “TILT” something that never happen before  ever when I had issues with the reels not  stopping  it never when to ”tilt”.   To reset it I have to remove the connectors from the reel assembly and power cycle the machine.  I clean and realign the reel,  check the arm and the kick switch …both where good. From what I reading it sound like it may be an issue with the door switch, which is good when tested with a meter but fails when test #3 is run.  If the machine works good while right test #8 I’m assuming that the reel assembly and board is OK?

Thank for reading, any help is appreciated Ray
Logged
tkrozleski
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 23
Offline Offline

Gender: Male
Posts: 308
« Reply #1 on: September 28, 2012, 11:56:23 PM »
What is on the display after the reels fail to stop? The error code on the display?
Logged
rainman
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 10
Offline Offline

Gender: Male
Posts: 38
« Reply #2 on: September 29, 2012, 02:25:25 PM »
It's still 50 000,  what else I noticed was all the lights on the reel reader turn off as soon as I pull the handle and pulling either reel connector that's mounted on the top back right hand side on the reel assemble and a power cycle will clear the "TILT"
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.071 seconds with 18 queries.