|
Title: WTB - 2.5A circuit breaker for Bally 6000 (or other Bally machines if same) Post by: JimSlot on January 27, 2014, 02:37:12 AM I'm looking to replace a 2.5A circuit breaker on my Bally 6000.
Link to a pic is here: https://www.dropbox.com/s/h3cg6iei5czepwl/breakers.JPG (https://www.dropbox.com/s/h3cg6iei5czepwl/breakers.JPG) Shipping would be to 18940 Thanks, Jim Title: Re: WTB - 2.5A circuit breaker for Bally 6000 (or other Bally machines if same) Post by: LeisureTimeSlots on January 27, 2014, 02:51:40 AM Are you sure the breaker is bad ? Swap your circut to the other breaker to see if the problem moves.
Title: Re: WTB - 2.5A circuit breaker for Bally 6000 (or other Bally machines if same) Post by: raz410 on January 27, 2014, 03:01:21 AM Jim, I have 4 of them, you can have them for the cost of shipping $2.50 LMK. Bob
Title: Re: WTB - 2.5A circuit breaker for Bally 6000 (or other Bally machines if same) Post by: JimSlot on January 27, 2014, 03:13:04 AM Bob,
Thanks! Let me know how to send you the $2.50 Jim Title: Re: WTB - 2.5A circuit breaker for Bally 6000 (or other Bally machines if same) Post by: raz410 on January 27, 2014, 03:16:17 AM Jim, My paypal is razs410@gmail.com Bob
Title: Re: WTB - 2.5A circuit breaker for Bally 6000 (or other Bally machines if same) Post by: JimSlot on January 27, 2014, 03:17:41 AM LeisureTime,
Yes, I'm sure it's the breaker. The machine would sometimes just be dead. I ran my finger across the circuit breakers to make sure they were all pushed in. They were all pushed in but as I ran my finger over one of them, the machine powered on. I ran my finger across it again and the machine powered off and then powered back on. I took the switch assembly out and tested the breaker with my meter - it is definitely faulty. The other breakers were fine and showed no sign of this loss of continuity that the one breaker was showing. Thanks, Jim |