New Life Games Tech Forums

HAs anyone actually got the EFT for cahsing out to host to work. I can get AFT to work but have a few machines with sas 5.0 that does not support AFT so i am adding EFT to program. I can get all the host to gaming machine commands to work but not gaming machine to host ie $24 and $64 

UPDATE: EFT to Host is working on my Igame. so now i wander if there is an option that is not turned on on my S2000s

the S2000's i have tryed with no luck have SG000251 or SG000363 in them

Cashless set to EFT
Also what you can do via EFT is controlled by the Version chip

AFT is the preferred method for handling transfer to and from the machine.

version chip is what i was afraid of cashless is set to EFT and i can Eft in just not out. i really want it to work since aft is not supported till SAS 5.10 and i have some machines lower than that

 

well use EFT for ones using SAS that does not support AFT and AFT for anything that does.

Other option is to configure it so every cash out becomes a hand pay and parse the hand pay poll data, and process the information like you would for a cashed out using EFT.
store it in your database, process it for statistics, etc.
then you can have system do a remote hand pay reset.

see my example below - I had to disconnect my game to force a hand pay.


0x51  Hand pay is pending
0x1B  Hand Pay
0x1B  Progressive Group:                00
0x1B  Progressive Level:                 80
0x1B  Amount:              00003885.00
0x1B  Partial Pay:                       0000
0x1B  Reset ID:                            00
0x52  Hand pay was reset

i do plan on using AFT if it is available, and EFT if AFT is not available, i did finally find a machine that supports both way eft so i can get my code working

thanks

Hi There,

Do you have any documentation on EFT.  It would be much appreciated.

no i have never found any documentation for it

Thanks, much appreciated