|
Title: "SMART MACHINE INTERFACE VERSION II Rev. A" and "#321-024-10". Post by: noellovesun on February 07, 2012, 06:13:55 AM To All new life games members,
Does anyone could help us to sorted our problem in regards to "SMART MACHINE INTERFACE VERSION II Rev. A" and "#321-024-10".This interface was connected to Bally Hot Shot Progressive.Our problem was the screen display "no mikohn controller connected",we found out that the Smart Machine interface VR1 (LM7805C and IC U7 (SN751178N) become hot.hotter than normal operation. and LED 2,3,4,no lit andnLED5 flashes abonrmal, compare to other good board Any help to resolve this problem would be much appreciated. Best Regards, Noellovesun SHLG Title: Re: "SMART MACHINE INTERFACE VERSION II Rev. A" and "#321-024-10". Post by: noellovesun on February 08, 2012, 09:07:11 AM To All new life games members, Does anyone could help us to sorted our problem in regards to the "SMART MACHINE INTERFACE board VERSION II Rev. A" and "#321-024-10".This interface was connected to Bally Hot Shot Progressive.Our problem was the screen display "no mikohn controller connected",we found out that the Smart Machine interface VR1 (LM7805C and IC U7 (SN751178N) become hot.hotter than normal operation. and LED 2,3,4,no lit andnLED5 flashes intermittent, compare to other good smart machine interface board. We have 7 board with the same problem. Any help to resolve this problem would be much appreciated. Best Regards, Noellovesun SHLG |