|
Title: What can I do with this? Post by: Marc1 on December 26, 2012, 08:59:59 PM I have something from mikohn..
On board is written cslog2 rev. C part #312-016-00 Does anybody knows what this is and how to program this? I have tried to program it like cham2 driver board but with no success,I get the message default error,check controller #1. Title: Re: What can I do with this? Post by: jay on December 27, 2012, 04:24:21 PM Please post a couple of pictures that number is really just a circuit board id number.
The ChamII+ (Note the plus) is a standalone progressive. The CHamII (Not plus) is a slave board to a CON2 SuperController and used to drive in-machine displays connected to a Linked progressive. They both look the same - even have the 9pin port. Hope this helps. Title: Re: What can I do with this? Post by: Marc1 on December 28, 2012, 09:49:11 AM Hy jay!
Thanks for answering! Here is a picture of my board: Title: Re: What can I do with this? Post by: danw on March 19, 2013, 05:30:43 PM It looks similar to the boards in my caribbean stud progressive table. I dont remember the exact board numbers, but I'll check and let you know.
Title: Re: What can I do with this? Post by: jay on March 21, 2013, 12:52:19 AM This is a ChamII (non plus).
You need a CON2 link controller to drive this. If your slot is a IGT you need a CON2i (with the 'i' representing IGT). I once bought a CON2 (non i) - drove the display fine but would not intergrate with my slot. |