Bill Validator Stacker Error" & "Door Open M" Triple Diamond Haywire

(1/6) > >>

JoeGuinn:
I have a Triple Diamond Haywire Slot... Anyone live Near Melbourne FL that can come out and repair it?

Model 9643800 Triple Diamond Haywire

I have 5 slots and they work pretty darn good expect for the triple diamond. Is there anyone who lives Melbourne FL who could repair the machine for me?
I am getting "Bill Validator Stacker Error" and "Door Open M" messages. Someone came out to work on the slot a month or so ago (after it had been serviced at the business I purchased it from) and said it was a programming error and never was able to fix it.

Thanks
Joe
Life is not measured by the breaths we take,
but by the moments that take our breath.

Buzz:
Joe The machine isn't seeing the cash can is installed. Just pull the can out and shove it back in, should fix the stacker error. Door open isn't a error it's just telling anyone in a casino the door has been opened and the message will go away after you play one game.

knagl:
Quote from: Buzz on April 10, 2013, 11:19:05 AM

Door open isn't a error it's just telling anyone in a casino the door has been opened and the message will go away after you play one game.

How are those meds treating you today, Buzz? :96- :96- :96-

"Door Open M" is an indication that the machine believes that the main door is open, and you will not be able to play a game until that's resolved.

"Closure x" is the message Buzz was thinking of, which is indeed not an error, but an indication that a door had been open but is now closed.

JoeGuinn:
Thank for the quick reply...
The "cash box" has been removed and firmly reinserted over a dozen times. The slot goes thru the motion like its working, but when I put in a quarter, the quarter falls straight thru to coin tray. This all started when the Motherboard was replaced by the business I purchased the slot from -- The board quit working because the battery needed to be changed. I was told the battery had leaked and another board was ordered and installed. The slot hasn't worked since then, it lights up, cycles thru the tests, but once a quarter is dropped in to play, it falls straight thru. The Bill validator will not accept any bills.
Joe
Melbourne, FL

qbert:
Joe,
You started the post talking about the bill validator error but in the last post you said coins drop right through to the tray.
You also said the MPU was replaced, it sounds like the machine is set up with coinless mode enabled. This probably happened when the new board was installed.
Do you know how to get into the set up mode and check this? (this needs to be in the disabled mode to use coins) you may need a key chip to change this setting.
I'm not a total expert like most of these guys on this site but I have set up a few S2000 machines and done some conversions. I will leave it to the experts if they think I'm off base here.
Are you still getting bill validator errors?
I'm sure we can work this out over this site but I am less than an hour away from you if it gets to that point.

Rich

Navigation

 Message Index