|
Title: s+ turnament chips in s2000 possible to print winning? Post by: vtyler on February 28, 2014, 09:19:20 PM i have been playing with a s2000 running s+ tournament software. i have it working but when a game finishes it just displays the final total on the display, is there a way to get the machine to print that total on a ticket?
Title: Re: s+ turnament chips in s2000 possible to print winning? Post by: Foster on February 28, 2014, 10:34:32 PM Last time I tried a S+ tournament chip in a S2000 it would come with a invalid ROM error, this was when I was a S2000 novice.
How did you get it to work? Title: Re: s+ turnament chips in s2000 possible to print winning? Post by: vtyler on February 28, 2014, 11:14:00 PM i didn't rely do anything special just installed correct chips cleared and keyed it you do have to enable the tournament mode and setup the time and credit settings.
Title: Re: s+ turnament chips in s2000 possible to print winning? Post by: Foster on March 01, 2014, 01:47:05 AM What chips are you using?
I just tried, and it gives me the same errors that I got many years ago when I tried. SG000598 SB001000 VS011GX1 ST0036 - Five times pay 2000+% in tournament mode. All I get is a System ERROR invalid SS EPROM F011 I tried the original but it was too slow so I copied it to a SST 27SF512-70 I made the programming software verify the chip numerous times I have other SS chips that work fine as long I copy them to a SST 27SF512-70ns (I try the orignal SS chip first and if it fails I copy it to an available 27SF512) Title: Re: s+ turnament chips in s2000 possible to print winning? Post by: Buzz on March 01, 2014, 04:25:18 AM Foster I really don't know why you would even want a tournament game but that's up to you. But if your putting a game chip (ST0036) where you need a SS chip don't you think that could be the problem ??
I have the files for SBT00518 R W & B 2C and a SBT00676 R W & B 3C If either one of them will do you any good. Title: Re: s+ turnament chips in s2000 possible to print winning? Post by: Foster on March 01, 2014, 05:13:34 AM Buzz
I started my replies because the original poster stated he is using a S+ Tournament (STxxxx) in a S2000. I was told years ago when I first tried it, it could not be done either. That is why I inquired how he is doing it. I almost think he has a SBT in the machine and is just leaving the SS chip in place and the SS chip is not being used by the machine. I don't think it is possible but who knows what IGT had to do in 1998 when they released the Vision and Vision Ready to get them on the floors fast I figure they came out with the SB001000 for regular SS chips and maybe another SB chip to use with S+ tournament chips. I like the 98% I set mine for I see a Batronix BX40 in my future. My GQ-2X is almost a RC boat anchor. Title: Re: s+ turnament chips in s2000 possible to print winning? Post by: vtyler on March 01, 2014, 01:59:08 PM i dont have the exact numbers for the sg and st (chip says st not sbt) chip as i am not at the shop. the sb is an sb001000 the vs was a gx0 or gx1. the machine is a double diamond. i wont be back into the shop until monday but i do know that the sg chisp were tournament specific and i believe you have to replace the ss chip with a st( software was already in the machine by the time i got to it. your problem may be with your sg
Title: Re: s+ turnament chips in s2000 possible to print winning? Post by: vtyler on March 01, 2014, 02:07:54 PM just checked the psr for the SG000598 i dont see that it support tournament mode.
|