Welcome, Guest. Please login or register.
May 18, 2024, 06:18:28 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  WMS WILLIAMS. (Moderator: tacman)
| | |-+  Pinout		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Pinout  (Read 5145 times)
e2ekielus
Guest
« on: January 25, 2011, 09:12:58 PM »
I would love to have a Schematic/pinout for a 360/550 backplane. I am Building into a slimline cabinet and rewiring my harness. Please help!
e2ekielus
Logged
e2ekielus
Guest
« Reply #1 on: January 25, 2011, 11:52:06 PM »
Well atleast the Bill validator pinout and diagnostic switch pinout. anybody?
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #2 on: January 26, 2011, 01:00:25 AM »
I hope this helps ya!
One's a 22 pin the other is a 24 pin.
I'm not sure what You have...>>>

* WMS bill validator J3 header pinout.png (10.69 KB, 599x395 - viewed 957 times.)

* WMS bill validator J3 header pinout001.png (7.96 KB, 501x266 - viewed 1495 times.)
« Last Edit: January 26, 2011, 01:11:38 AM by stayouttadabunker » Logged
e2ekielus
Guest
« Reply #3 on: January 26, 2011, 01:50:39 AM »
it is the 24 pin, and I had figured out that #1 was 12v and #13 was gnd, However I am using a serial interfaced BV like the ICT N6 used in pot of golds so im unsure on the coding still
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #4 on: January 26, 2011, 02:23:00 AM »
Be careful,
The schematics show Pin#13 for the 12V and Pin#1 & Pin#2 as grounds!
I really have no clue about the rest of it though.
I wish I could help you more.
You might do better if you can get your hands on the bill acceptors
pin-outs directly from the JCM or ICT websites perhaps?
Logged
e2ekielus
Guest
« Reply #5 on: January 27, 2011, 07:39:41 PM »
Yeah I said that wrong but had it right on harness. Anyway, I am using a BV with a RS232 connection which has 7 wires: (2)gnds, 12v, Rxd, send line, int line, lockout. I see by the schematics that the pins i should use (besides power) are pins 3 thru 6: BV232TxD, BV232RxD, BV232RtS, BV232CTS, and lockout.
This is how i have wired them:

 Pin         Backplane              BV

13             12V                    12V
1               gnd                     gnd
2               gnd                     gnd
3             BV232Txd              Rxd
4             BV232Rxd              sendline
5             BV232RtS              none
6             BV232CTS             Int line
11           Billlock                    lockout

My BV accepts bills but does not completely cycle by stacking the bill as if it is not recieving the ok from board on the request to send(RTS).
Any Ideas?
e2ekielus
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #6 on: January 27, 2011, 07:45:03 PM »
Your BV shows "none" for that one.
It's almost as if you have to see if there's a pin you're missing out on the BV header?
It's a longshot but I'm guessing pin 9?
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.083 seconds with 20 queries.