|
Title: bally 5500 pro problems Post by: typeo on November 16, 2008, 06:12:06 PM lets see my problem is when you power on the machine the reset light stays constant it never boots up. I tried switching mpu boards and mains no change I also tried switching door switches
Also this all started when somebody tried to cash out during the payout the power blinked and its been like that since there is no display no error messages any help would be greatly appreciated! Title: Re: bally 5500 pro problems Post by: blueridgeslots on November 16, 2008, 07:50:13 PM Most likely the power supply, very common problem, we sell the board to replace inside the PDU for $23.95 plus shipping, it is an upgraded version, unplug the power cord at the PDU. pull your PDU out, flip it over, I am sure you will see a burnt board, you can test voltages if you want but usually a blank display is the power supply
|