|
Title: IGT P-PLUS BOARD Post by: Mwawana on September 26, 2012, 09:24:44 AM Hi i have Igt p- plus board Assy no7570320, the problem is when i switch on the machine i get coin in time out, if i use another board machine is ok. So the problem is in the board i have changed RP1, U1 and U12 still the problem is there can someone help me?
Title: Re: IGT P-PLUS BOARD Post by: nikstar on September 26, 2012, 07:30:41 PM It looks like one of the coin optics is not connected to the PCB. If this is on a non IBA machine it should be a cable on one of the connectors going to PCB tray. They are at the left side of the hopper and they are bending as you open and close the door and eventually they cut off the connector. You can also press the test button and check the readings for the a b c optics.
Title: Re: IGT P-PLUS BOARD Post by: cowboygames on September 26, 2012, 07:52:21 PM Except he stated changing the board makes the machine work
Title: Re: IGT P-PLUS BOARD Post by: leapyearguy on September 26, 2012, 11:47:41 PM this is a players edge plus board right? if it was a players edge (not plus) there is a dip switch on the board that controls whether coin handling is mechanical (switch) or optical. just curious why you would post this question in the bally reel section
Title: Re: IGT P-PLUS BOARD Post by: cowboygames on September 27, 2012, 12:09:21 AM New member, he's learning...
Title: Re: IGT P-PLUS BOARD Post by: leapyearguy on September 27, 2012, 12:37:45 AM no worries, just curios
Title: Re: IGT P-PLUS BOARD Post by: cowboygames on September 27, 2012, 12:39:54 AM Moderators generally catch these and move them to the right topic
Title: Re: IGT P-PLUS BOARD Post by: jay on September 27, 2012, 04:13:54 AM MOVED
|