Welcome, Guest. Please login or register.
May 15, 2024, 03:35:02 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  BALLY PRO - 24 VDC - testing hopper motors		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: BALLY PRO - 24 VDC - testing hopper motors  (Read 2498 times)
FOXSSLOTS1
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 323
Offline Offline

Gender: Male
Posts: 1239


Me at work
« on: October 31, 2009, 02:25:34 PM »
I have several hoppers that are not working - I tried to hook up a jumper to known? 24 vdc (the coin in/out meters  has 24 vdc using the yellow/blue wires and the grey/white is the ground - when I hook up my jumper to the motor - the motor does activate and run for a second or two then trips the fuse.  Is there an easier way to test these motors (using the forward/back buttons - motor will reverse but bind going forward) - just trying to narrow my problem to the board or the motor.
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #1 on: October 31, 2009, 02:40:57 PM »
Berry  remove the knife and see if it jams going forward,
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #2 on: October 31, 2009, 03:19:13 PM »
Quoting FOXSSLOTS1>>>(using the forward/back buttons - motor will reverse but bind going forward)

Contact brushings are shot in the motor I think?
Getting caught up in the armature when going forward....
I'd check the motor brakes too.
Logged
FOXSSLOTS1
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 323
Offline Offline

Gender: Male
Posts: 1239


Me at work
« Reply #3 on: October 31, 2009, 04:26:28 PM »
i stripped the hopper down to its core - there is nothing in the way.  they do go forward slowly -  will try a good motor to see what happens - seems strange I have 3 bad motors.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.092 seconds with 20 queries.