New Life Games Tech Forums

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games. => Topic started by: solinoid on October 23, 2012, 06:52:31 PM



Title: Vision request (long shot)
Post by: solinoid on October 23, 2012, 06:52:31 PM
Hi everyone,
Would anyone have or know where I can get a manual for the lcd/computer unit used in the Visions. Would like info on the computer board in, such as pinouts and that kind of stuff.
I have some evil ideas and need more info to carry them out :79- :79- :79- :79- :79- :79- :79- :79-
Thanks,
Barry


Title: Re: Vision request (long shot)
Post by: TZtech on October 23, 2012, 07:03:32 PM
As far as I know no such manual exists. The processor board is probably an off the shelf item You may be able to find some data on that.
This thread may be a good starter for some general info -http://newlifegames.net/nlg/index.php?topic=9966.0

We like evil ideas - Do share if it works  :88-


Title: Re: Vision request (long shot)
Post by: solinoid on October 23, 2012, 07:37:51 PM
TZ,
Thanks for the response. I can't seem to find anything on that board. Called Radisys that makes the controller chip, they seem to know nothing about the board, could just be a board manufacture using their chip though. I don't see any markings on the board, but I didn't remove the LCD either. Might be hiding under there. Have another unit coming and may be able to get more info then. Don't want to disable the machine, wife likes it too much :89-
And if the evil experiment doesn't blow up in my face, I'll be happy to share :200-
Barry