Arcade III Change Machine

(1/1)

Oscar Pompa:
Model with Bill Aceptor:Trilogy and Hopper: Evolution

To Setup the Bill Validator to EUR or USD you will need to download the program ACEPTOR TOOLS from their page http://www.pyramidacceptors.com/ and using the USB cable for Trilogy series use the desire currency:

The last file I used to set the currency to Euro was: T5EUR130S48.PDB
The file to set the currency  to US was: T5KUSA114S40.PDB

check the next picture for Example:

Oscar Pompa:
Then  you have to change the set up options  in the BV, changing as per pictures below

Bill 1 = 5 Eur
Bill 2 = 10 Eur
Bill 3 = 20 Eur
Bill 4 = 50 Eur

or

Bill 1 = 1 Usd
Bill 2 = 5 Usd
Bill 3 = 10 Usd
Bill 4 = 20 Usd

Oscar Pompa:
Arcade Changer III Configuration:

Press the blue button twice to enter to the configuration menu. Then press red button, is going to ask you for a password, just press the red button again (default  pass is 0000) , it will say GOOD Then press the blue button to navigate into the menu and change the options settings depending of the  currency you will setup.
Increment settings with green button, Decrement with Yellow Button, to go out of the configuration menu press the red button, it will say “quit” and press again the red button to save changes.

Oscar Pompa:
CONFIGURATION IN EUROS FOR 0.20 CENTS COINS

UNITS = 0.00
DISPLAY = Coins
HOPER TYPE = Evo
HOP 1= 0.25 ( Coin Denomination )
HOP2 = Off
TTHI = 0
TT NIN VALUE = 0
NOTE1 VALUE = 1
NOTE1 TYPE = US
NOTE2 VALUE = 5
NOTE2 TYPE = US
NOTE3 VALUE = 10
NOTE3 TYPE = US
NOTE4 VALUE = 20
NOTE4 TYPE = US
N1H1 = 4
N2H1 = 20
N3H1 = 40
N4H1 = 80

CONFIGURATION IN DOLLARS  FOR 0.25 CENTS COINS

UNITS = 0.00
DISPLAY = Coins
HOPER TYPE = Evo
HOP 1= 0.20 ( Coin Denomination )
HOP2 = Off
TTHI = 0
TT NIN VALUE = 0
NOTE1 VALUE = 5
NOTE1 TYPE = EUR
NOTE2 VALUE = 10
NOTE2 TYPE = EUR
NOTE3 VALUE = 20
NOTE3 TYPE = EUR
NOTE4 VALUE = 50
NOTE4 TYPE = EUR
N1H1 = 25
N2H1 = 50
N3H1 =  100
N4H1 = 250

Navigation

[0] Message Index