Welcome, Guest. Please login or register.
May 07, 2024, 06:30:28 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  Not sure what I'm getting into with this progressive stuff but here goes.		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Not sure what I'm getting into with this progressive stuff but here goes.  (Read 3814 times)
MikeCamp
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 202
« on: January 30, 2013, 01:44:21 PM »
Hello all,

I bought a nice Triple Double Wild Cherry that appears to have some hardware left in it to run a standalone progressive or at least thats what I think it is.  I've done some reading on here and found bits and pieces but still a bit lost.  I will post a couple of pictures of what is in the machine and hopefully we can go from there.  My first priority is to just see if it works by getting something to appear on the display.  Then I need to figure out where to hook the wires to allow it do display my progressive jackpot (which I understand has to be turned on in the machine).  So as anyone who has tried to do this before you understand I'm a bit overwhelmed with this little project.  But hey its a chance to learn right?  It appears that it did once work in the machine and not sure why anyone would disconnect anything but who am I to question others motives.  Anyway, here are my pictures.  Please Help because my new machine would look so much better with some numbers on its progressive display Smiley

* DSCN0124.JPG (756.2 KB, 2048x1536 - viewed 189 times.)
Logged
MikeCamp
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 202
« Reply #1 on: January 30, 2013, 01:46:11 PM »
Don't know why only one picture showed up but here is the rest of it.

Mike

* DSCN0120.JPG (785.85 KB, 2048x1536 - viewed 177 times.)
Logged
CVslots
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 432
Offline Offline

Gender: Male
Posts: 2803



WWW
« Reply #2 on: January 30, 2013, 03:20:03 PM »
Ooohhh, I hate progressives!! They scare me, fear of the unknown I guess.  hide3     Darrell does ours, while I play dumb and don't get involved!  bust gut laughing

Many of the guys here do them all the time though, and I'm sure will help you out. Looks like you have everything you need in the pictures. You just need to download that program (dont ask me the name, i have no clue) to a laptop to program....I think!  Scratch Head

Roz
Logged

www.CentralValleySlots.com
Email: centralvalleyslots@yahoo.com
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #3 on: January 30, 2013, 03:36:21 PM »
Well....judging from the photograph posted above, I see that the power harness to the Mikohn driver board is hooked up
and there's a ribbon cable also installed connecting to the display panel.
However, there's no communication cable connected from the Mikohn driver board to receive any input from the machine!

Here's the driver board end of the required harness needed...>>>

* 2011-02-16 19.40.24.jpg (1141.12 KB, 2048x1536 - viewed 174 times.)
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #4 on: January 30, 2013, 03:39:31 PM »
Here's what cable looks like to go to mother board

* igt cable.JPG (788.6 KB, 2048x1536 - viewed 188 times.)
Logged
MikeCamp
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 202
« Reply #5 on: January 30, 2013, 03:41:51 PM »
I see bits and pieces of how to do it all over (or either I'm to stupid to see the big picture).  I was looking for a step 1 thru step x on what to do and how to do it kinda method.  Maybe that should be my goal is to create something like that in this process.  I need to find where the wire that connects the box to the slot machine goes etc....  I did just dig out a old Dell laptop that still had a serial port on it because it appears I need one of those and from a previous post I found some dos bases PSP software so gonna load that and see where that gets me.  I just need to make sure I have all the correct wiring connections made and the slot machine setup to send the signal to it.  Fun fun, live and learn.

Mike
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #6 on: January 30, 2013, 03:44:03 PM »
Bad news though....you're missing the CHAMII+ "Standalone" driver chip as well...  bawling hissy fit
You're gonna have to place a WTB ad in the "Classifieds" section of NLG for that.

Anyways, here's a drawing of the harness from somewhere...>>>

* Mikohn Harness.jpg (31.2 KB, 392x264 - viewed 165 times.)
Logged
CVslots
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 432
Offline Offline

Gender: Male
Posts: 2803



WWW
« Reply #7 on: January 30, 2013, 03:47:54 PM »
Mike, I have some notes and diagrams that I've gathered from guys here...I will email them to you.  yes

Roz
Logged

www.CentralValleySlots.com
Email: centralvalleyslots@yahoo.com
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #8 on: January 30, 2013, 03:48:35 PM »
You have to make a cable to go from serial port on Mikohn control panel to serial on computer
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #9 on: January 30, 2013, 03:52:49 PM »
There's a heck of a lot of info on all of this in the CHAM2+ sections of NLG.
Many, many members have installed these ancient progressive thing's into their machines.
Try typing in "CHAMII+" into the search box
and be prepared for a lotta reading!
But the cool thing is a lot of members posted several photographs of this  puppy!
There's a lot to learn!  yes
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #10 on: January 30, 2013, 03:55:28 PM »
 Clap Clap I agree with Bunker
Logged
MikeCamp
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 202
« Reply #11 on: January 30, 2013, 05:41:33 PM »
Will the device do anything without that chip?

Mike
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #12 on: January 30, 2013, 05:52:09 PM »
I could be wrong but you are working on an IGT 2000? You should not need chip. The Bally uses chip
Logged
MikeCamp
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 34
Offline Offline

Gender: Male
Posts: 202
« Reply #13 on: January 30, 2013, 06:25:59 PM »
Oh crap, just also noticed that the shiney little thing sticking up next to the chip above the connector in the above picture is broke off on mine.  Is that something that can be purchased and re-soildered?

I found the end of the cable going to the mb, it was cut off and could not find the rest of the cable so guess I'll see if radioshack has the other end and try building one and at the same time pick up a 9pin serial cable Smiley

Mike
Logged
stormrider
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 131
Offline Offline

Gender: Male
Posts: 772
« Reply #14 on: January 30, 2013, 07:12:51 PM »
It's not going to work without the U19 chip
Logged
FORDSBS
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 363
Offline Offline

Gender: Male
Posts: 4162


PET
« Reply #15 on: January 30, 2013, 07:20:44 PM »
Stormrider is correct. I was talking about the little chip that goes in JT1 on backboard or motherboard on Bally.
« Last Edit: January 30, 2013, 07:44:20 PM by FORDSBS » Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.083 seconds with 20 queries.