Welcome, Guest. Please login or register.
May 05, 2024, 10:17:40 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  BALLY Game Maker. (Moderator: tacman)
| | |-+  Stacker box door open 		0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Stacker box door open  (Read 2623 times)
CYRIL1973
NLG Member 101 to 500 Post
***

Total Karma Storms: 10
Offline Offline

Gender: Male
Posts: 255
« on: June 23, 2012, 04:23:15 PM »
Hi,

There is no bill acceptor any more, I switched it off in the options but it still shows stacker bos door open. The cables are laying around in the machine and I don't know what to do to clear this code.

Is there a dipswitch on the board to turn the bill acceptor off, just like in the Bally 6000 for example...?

Thanks for your help.

Anyone with a gamemaker with bill accptor, I would be glad to get a pic of where the cables go...
Logged
azgamingslots
NLG Member 101 to 500 Post
***

Total Karma Storms: 9
Offline Offline

Posts: 118
« Reply #1 on: August 28, 2012, 12:19:16 AM »
connect yellow and gray wires together,  then insulate orange wire separately.
Logged
CYRIL1973
NLG Member 101 to 500 Post
***

Total Karma Storms: 10
Offline Offline

Gender: Male
Posts: 255
« Reply #2 on: September 17, 2012, 05:19:56 PM »
Hi,

Thanks for helping.

I tried to follow your instructions but it ended up into a short cut.

Are these wires the ones you were talking about?

The picture shows the cable that was plugged to the bill acceptor...

Thanks...

* DSCN2293.JPG (106.63 KB, 500x375 - viewed 316 times.)
Logged
2Nutz
New NLG Member 1 to 100 Post
**

Total Karma Storms: 8
Offline Offline

Gender: Male
Posts: 33
« Reply #3 on: September 20, 2012, 10:49:23 PM »
That harness plugs into the bill validator board, which plugs into the BV head.  There is a separate harness going from the BV board to the stacker box and micro switches.  Picture of the BV board attached (borrowed from elsewhere).  The white plug on the board is what connects to the harness going to the stacker.  Not a direct answer to your by-pass stacker issue but hopefully helps.  

* JANUARY 2011 036 copy-500x500.jpg (110.54 KB, 500x500 - viewed 297 times.)

* IMG_4845.JPG (103.85 KB, 800x600 - viewed 303 times.)
« Last Edit: September 20, 2012, 11:36:20 PM by 2Nutz » Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.094 seconds with 19 queries.