|
Title: need to program igt uba 14 Post by: madmanzippy on November 21, 2012, 11:14:05 PM Hi there,
I am wanting to program a validator I got from overseas and needs to be programmed for New Zeland notes. I know someone with various programming tools etc but I do not have software or know how to do it. Can anyone help? Thanks Title: Re: need to program igt uba 14 Post by: stinkey on January 27, 2013, 07:13:05 AM Hello there how did you get on in resloving this issue, As I think i have the same problem but using an Aussie note acceptor on NZ mu ti game machine
Title: Re: need to program igt uba 14 Post by: ChizzleMonkey on February 22, 2013, 10:24:19 AM You will need the firmware for he uba in your country. You will also need the JCM Tool Suite or just the uba download program from here: http://www.jcmglobal.com/en/support/downloads.aspx
JCM sells a cool little tool called the Blue Wave. You can upload the firmware from the tool to the uba while it's in the machine with it. Otherwise you will also need to rig up a power supply for the uba. |