|
Title: White button don't work FIXED Post by: therockinelvis on August 08, 2013, 05:27:16 PM I just picked a S+ up and it had a dead battery code 12. Changed the battery and got normal 61. White button will not change it to 61-1 no matter how long or hard I push it. I traced the wires back to the top of the mpu box. There is a disconnect plug and I checked cont. and found none pushing button. I am assuming that they just make connection so I jumped them and still no 61-1. I put in a different board and got 65-1 but still nothing from white button. Bottom motherboard maybe? Jim
Title: Re: White button don't work Post by: therockinelvis on August 09, 2013, 09:14:32 AM The 61 loop is where it goes to 61-1 and then goes back to 61. Mine won't change to 61-1. I did a clear and it counted up as it should. Then I put the sp back in and had the 61. Pushing the test button does nothing. I even tried another board and got 65-1 and pushing the button did nothing. Pushing the test button only makes a circuit, not apply voltage, right? I have unpluged and repluged everything.
Title: Re: White button don't work Post by: therockinelvis on August 09, 2013, 05:11:15 PM Must have been a bad connection. I change the motherboard and then had no led's. Changed it back and pluged and unpluged everything several times. Poof like magic everything worked. White test button and all. Still have to turn bdv on and set coin. Thanks
|