S2000 Progressive with Spectrum II and multi-denomination

<< < (5/5)

qbert:
Dip switch pic

Foster:
Dip Switch closest to the EEPROM or power connection controls display color
All off green
3 turned on red
1 and 3 turned on orange

knagl:
Quote from: qbert on May 09, 2013, 12:21:02 AM

I was wondering if there is a way to change the display color.

Depending on the chip in your Spectrum display, you may also have the option of an automatic scroll between all three colors. Check out the following thread (and be sure to read the additional pages in that thread for additional details) for more information:

http://newlifegames.net/nlg/index.php?topic=762.msg5308#msg5308

qbert:
Thanks for the thread that is really cool.
Now that I got may Spectrum going I have a Mikohn unit that I would like to set up. Anybody got any pics of where the wires go? It has a display and a power supply with a board on top of it with about four of five cables to attach.

knagl:
Check the Mikohn progressive section of the forum. There are hundreds of posts there.

Make sure that your Mikohn unit is a stand-alone progressive (like a ChamII+) or it won't work without a separate controller. Again, see the Mikohn section for more information, and feel free to start a new thread there for questions related to your Mikohn display.

Navigation

 Message Index