New Life Games Tech Forums

I just got 2 new vision machines, that puts me up to 24 now! Yay! Anyways... Every time I play the machine it works fine...Until I load the machine and it gets to 200 credits (loading it with bills). then it says coin in jam right away, and I open and close the door to no avail, the code will not go away. I do a ram clear on the machine and it works fine again until I load the machine to 200 credits again. I can load it with 1 $50 and it locks up right away. If i load it with a 10 and 2 $20's it does the same thing. I have already swapped out the coin compairitor and the coin optics. Does anyone have any ideas for me?

Thanks,
Bryan

Door I/O????? :103- When I had my very first machine I had that same problem but I would be putting in coins or something and it would be random although there was no jam. My machine was under warranty at the time so they changed the comparator but that did not work. They they just changed the whole machine and told me that it would just keep getting that problem so it would be better to change the machine. My guess though is the I/O card.

Humm... :103-
It could be the door I/O, I will check it out. I am having trouble now with my max bet button. It wont work now cause I put a new led board in for the display, It was flickering. I swapped it out now I have no max bet button. I was thinking of swapping out my button panel wire harness. :5-

i would try swaping the processor board with another machine just to rule that out(clear any credits first)   

I put an new wire harness for the button pannel on the machine and all problems were solved. I think the wires were shorting out going to the door I/O board and it was giving me trouble. Thanks for all your help. :244- :131-

Hey tellmeaboutit!
Thanks for tellingusaboutit!  :244-   :5-