Welcome, Guest. Please login or register.
May 28, 2024, 10:13:25 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  S2000 reel tilt 2		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: S2000 reel tilt 2  (Read 6558 times)
zarobhr
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 178
Offline Offline

Gender: Male
Posts: 622
« on: July 28, 2011, 06:10:49 PM »
I changed my crappy non washable reel strips and now when reels cycle after power on or closing door reelo 2 only turns a little bit and goes to reel 2 tilt. i have tried another reel but same issue, what else can i check
Logged
Yoeddy1
The OCD kit hoarder
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 3280



WWW
« Reply #1 on: July 28, 2011, 06:18:22 PM »
Since you've determined that the reel isn't the problem, assuming that those same reels work in slot 1 and/or 3, I would try open and close the main door a couple of times to see if the reels will spin up and if you get to an insert coin status on the display.  Power cycling the machine would be a good idea too.  With the power off, reseating the MPU wouldn't hurt.

Jason
Logged

Yoeddy's IGT Slot Machine Videos
http://www.youtube.com/user/Yoeddy1
Yoeddy1
The OCD kit hoarder
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 3280



WWW
« Reply #2 on: July 28, 2011, 06:20:06 PM »
Turn jackpot key?  Can't hurt.

Jason
Logged

Yoeddy's IGT Slot Machine Videos
http://www.youtube.com/user/Yoeddy1
zarobhr
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 178
Offline Offline

Gender: Male
Posts: 622
« Reply #3 on: July 28, 2011, 06:27:11 PM »
swapped reels with different machine , open and closed door several times, turn jackpot key with door opened and closed, and power cycled several times

still reel 2 tilt
Logged
Yoeddy1
The OCD kit hoarder
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 3280



WWW
« Reply #4 on: July 28, 2011, 06:32:38 PM »
Interesting.  Was the reel removed or installed while the power was on by chance?  Do you have another MPU that could be tested?  Might try reseating reel cable connections too.

Jason
Logged

Yoeddy's IGT Slot Machine Videos
http://www.youtube.com/user/Yoeddy1
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #5 on: July 28, 2011, 06:46:33 PM »
After Jason's suggestion, try swapping the harness connections between reels one and two (with power OFF), and see if the tilt follows the reel or the harness.
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
zarobhr
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 178
Offline Offline

Gender: Male
Posts: 622
« Reply #6 on: July 28, 2011, 06:58:10 PM »
dam looks like my mpu board is the problem, i swapped it out with another and no more tilt, swapped it back and it tilted again

any idea what gets lost when i swap the boards?

i noticed that my multidenom stayed the same

what about meters, asset id, progressive setup etc anyone know
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #7 on: July 28, 2011, 07:35:19 PM »
What Game chips ( SG****** ) do you have on the bad board and on the good board ?? 
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
zarobhr
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 178
Offline Offline

Gender: Male
Posts: 622
« Reply #8 on: July 28, 2011, 07:46:47 PM »
both are 363
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #9 on: July 28, 2011, 07:59:37 PM »
Well you shot my idea in the foot.  What happens if you put the bad board in the good machine ? 

Are you going to loose some settings by switching two boards between two machines, I'd say pretty good chance you will.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
zarobhr
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 178
Offline Offline

Gender: Male
Posts: 622
« Reply #10 on: July 28, 2011, 08:06:30 PM »
well i did the swap and didnt loose anything but the secure enhanced validation id for SAS.

all my progressive info, meters asset ID, multi denom,  etc did not change

the biggest thing i was worried about was the meters since i poll them with sas and record it, even auto poll it and record when the cash box is pulled for my drop. just to see if everyhting matches up. of course the only thing every in cash box when i pull it is about 100 redeemed tickets lol
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #11 on: July 28, 2011, 08:09:59 PM »
What I meant was, does the bad board work in the good machine ??  And the good board work in the bad machine ??
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
zarobhr
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 178
Offline Offline

Gender: Male
Posts: 622
« Reply #12 on: July 28, 2011, 08:12:52 PM »
aw gotcha the good board is working in the bad machine (which means the machine is good now.)i do not have another machine ready to try the bad  board yet, but if i put it back in the same machine reel 2 still tilts, so its definately a bad board
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #13 on: July 28, 2011, 08:17:40 PM »
Quote from: zarobhr on July 28, 2011, 08:12:52 PM
aw gotcha the good board is working in the bad machine (which means the machine is good now.)i do not have another machine ready to try the bad  board yet, but if i put it back in the same machine reel 2 still tilts, so its definately a bad board

OK I see you installed a spare board. When you installed the spare, did you use the Base and Game chips from the bad board ?? 
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
zarobhr
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 178
Offline Offline

Gender: Male
Posts: 622
« Reply #14 on: July 28, 2011, 08:19:10 PM »
nope

the new board i put in had the same chips
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #15 on: July 28, 2011, 08:26:21 PM »
You can see where this is going, Do you have a bad board or bad eproms ?? 
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
zarobhr
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 178
Offline Offline

Gender: Male
Posts: 622
« Reply #16 on: July 28, 2011, 08:29:45 PM »
guess ill drag another machine out of storage i test it in there
Logged
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #17 on: July 29, 2011, 04:47:35 PM »
Quote from: Buzz on July 28, 2011, 08:26:21 PM
You can see where this is going, Do you have a bad board or bad eproms ?? 

Quote from: zarobhr on July 28, 2011, 08:29:45 PM
guess ill drag another machine out of storage i test it in there

I think that Buzz is trying to get you to swap the eproms from the bad board to the good board stir the pot / get cooking to see if the problem follows the chips or not.... Gotta give him credit +1 (Karma, or whatever) as that is much easier than dragging anoth machine out at this point. yes

CH CaptainHappy
Logged
  Come sail away, Come sail away Come sail away with me..
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #18 on: July 29, 2011, 05:49:16 PM »
i still find it strange that your mpu would go bad just by pulling the reels out.....i pull my reels out all the time on my s2k to clean them....as long as your machine is off when you pull them.......
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.124 seconds with 19 queries.