Welcome, Guest. Please login or register.
May 07, 2024, 03:56:26 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  SENTINEL II		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: SENTINEL II  (Read 6013 times)
777tow
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 34
« on: October 24, 2012, 05:37:36 AM »
I have a IGT S2000. I ordered a player tracking bracket and panel and also recieved the Sentinel II that supposedly goes with it. I really want the led board to work and see what is programmed on there. Can I do that?
Also, I want to hook this up, but this is out of my league. I am not good in electronics. I figured I would give it a try and see if someone may have pictures of wiring hook ups, or just plain knowledge of getting the led panel to operate. While researching this, I have also seen some other posts about player tracking but I am only interested in having the message displayed.
Any help or knowledge would be truly appreciated. Willing to learn here!
Thanks!

Eric
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #1 on: October 24, 2012, 09:43:00 AM »
Please post pictures of the Sentinel II

I cant think of what a Sentinel II would be.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
777tow
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 34
« Reply #2 on: October 24, 2012, 03:46:40 PM »
Foster....Casino Data Systems Sentinel II ? I'll post a pic when I get home....
Logged
777tow
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 34
« Reply #3 on: October 24, 2012, 09:09:02 PM »
Here is the picture of the Casino data Systems (CDS) board. I found where 4 of the 9 wires go. Probably gonna need help with the wires that connect to places inside the machine.

* CDSBoard_001.jpg (448.76 KB, 1800x1200 - viewed 231 times.)
Logged
777tow
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 34
« Reply #4 on: October 24, 2012, 09:11:41 PM »
These 2 green wires I have no idea where they go or what they are for. Both wires are screwed in to the metal plate that the board is mounted on. Excuse my jargon, but like I said I am challenged in the slot/electronics world.

* GreenwiresCDS.jpg (241.35 KB, 1200x1800 - viewed 228 times.)
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #5 on: October 24, 2012, 09:16:54 PM »
Quote from: 777tow on October 24, 2012, 09:11:41 PM
These 2 green wires I have no idea where they go or what they are for. Both wires are screwed in to the metal plate that the board is mounted on. Excuse my jargon, but like I said I am challenged in the slot/electronics world.

The greens are just ground wires.
Logged
777tow
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 34
« Reply #6 on: October 24, 2012, 09:37:40 PM »
Thanks coors.....I figured.......I am used to ground as black.....ok...more pics to come shortly. I took em with my phone and I have to resize em. So heres more what I found. There are 2 wires connected to the board. One is for Bank In, and the other is for Bank Out. I am assumming that these are not needed as either its for a data bank or something that ties in other machines that are hooked up for a progressive pay out. ( I see there is another wire that is marked as Progressive on another corner of the board). I am also assumming that the 2 wires for bank In and Bank out are NOT needed? Am I right? My goal is to just have a scolling message on the LED screen on the tracking panel.   Comments?
Logged
777tow
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 34
« Reply #7 on: October 24, 2012, 09:51:11 PM »
Here is a pic of 1 plug that I am for certain have no idea where it goes or what its for. One end is split into 2 and connected in to the board marked RS-232 in 2 seperate places. This loose end goes to where? What is it for?

* thin connect.jpg (1213.47 KB, 2448x3264 - viewed 245 times.)
« Last Edit: October 24, 2012, 10:13:22 PM by 777tow » Logged
777tow
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 34
« Reply #8 on: October 24, 2012, 09:59:05 PM »
This wire is 3 wires wrapped together as one but 3 heads as you can see in the photo....what is this for? It is connected to the board where there are 22 prongs. Every 2 prongs are 1 section so 11 sections to plug things into. These wires as I trace them are connected to 9 and 11. Green and white wires to 9 and Red and Black wires to slot 11.

* 3 wires together.jpg (1017.76 KB, 1840x3264 - viewed 224 times.)

* board11.jpg (1199.93 KB, 1840x3264 - viewed 234 times.)
« Last Edit: October 24, 2012, 10:13:44 PM by 777tow » Logged
777tow
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 34
« Reply #9 on: October 24, 2012, 10:14:18 PM »
I know...im crazy ! LOL !
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #10 on: October 24, 2012, 10:39:49 PM »
Quote from: 777tow on October 24, 2012, 09:51:11 PM
Here is a pic of 1 plug that I am for certain have no idea where it goes or what its for. One end is split into 2 and connected in to the board marked RS-232 in 2 seperate places. This loose end goes to where? What is it for?

This thing is most likely not going to display anything or at the most display disconnected. As most depended on backroom server for the info and messages. The rs232 will go to the netplex box behind the hopper on the back wall. The others look like power but these things usually had a transformer in the machine that powered them.
Logged
777tow
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 34
« Reply #11 on: October 25, 2012, 01:29:39 AM »
coors........it comes with a plug (A regular looking 120 home plug) that attaches to the board. I was going thru the belly of the machine, and was trying to see what plugs were missing a connection that macthed up with the plugs that are coming out from the board. I powered up the Player Tracking Board and it said No Connection Available.
As I understand it, there isnt really much I can do with it?
Is there anyway that a message can be programmed into there besides the NO CONNECTION AVAILABLE? Would be nice to have a message or words besides that.
Thanks in advance!
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #12 on: October 25, 2012, 01:43:40 AM »
Quote from: 777tow on October 25, 2012, 01:29:39 AM
coors........it comes with a plug (A regular looking 120 home plug) that attaches to the board. I was going thru the belly of the machine, and was trying to see what plugs were missing a connection that macthed up with the plugs that are coming out from the board. I powered up the Player Tracking Board and it said No Connection Available.
As I understand it, there isnt really much I can do with it?
Is there anyway that a message can be programmed into there besides the NO CONNECTION AVAILABLE? Would be nice to have a message or words besides that.
Thanks in advance!


I do not know of a way..the message comes from the server. The mastercom set ups you can program scrolling messages of your choice, the others no so, that I have figured out yet. I can help you with any mastercom message you want and contact RAZ on this site
Or ebay for a mastercom setup to fit your machine. If you cannot get in touch with him let me know and I will get you two in touch.
Logged
777tow
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 34
« Reply #13 on: October 25, 2012, 02:29:50 AM »
Ok...thanks ! I appreciate your help. At least I learned many things today....appreciate you and Foster....
Logged
idesign
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 509
Offline Offline

Gender: Male
Posts: 1456


If it aint broke why mess with it?????
« Reply #14 on: October 25, 2012, 10:11:28 AM »
I have one of those and changed the message to PLEASE INSERT TICKET as an experiment.  Most of the connections and the spaghetti of wires that comes with it can be removed.  The card reader will not function with it either as well as the button panel.  You are limited to the number of lettes (and spaces) in original message it displays I tried more words but it will not display anything at all if it exceeds the original number of letters (and spaces).  No scrolling, just flashing a message.
Logged
777tow
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 34
« Reply #15 on: October 26, 2012, 04:33:17 AM »
idesign,
Can you share your top secret information with me? Id like to change the letters to something better that No Connection Available...LOL !
Logged
idesign
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 509
Offline Offline

Gender: Male
Posts: 1456


If it aint broke why mess with it?????
« Reply #16 on: October 26, 2012, 08:54:20 AM »
Sure, just take the eprom (it has a paper label on it) out of the board, read the chip in an eprom burner, save it as a file and load the file up in a hex editor.  Do a search on No Connection Available, change the words to whatever you like but stay within the original number of letters including the PERIOD (.), save the file and burn the file to a 27C040 chip.  Insert the chip into the board and happy trails to you.
Logged
777tow
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 34
« Reply #17 on: November 03, 2012, 01:34:25 AM »
Thank you to idesign!!!!!!!

* 2012-11-02_17-30-59_955.jpg (1766.46 KB, 1840x3264 - viewed 239 times.)
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.088 seconds with 19 queries.