Welcome, Guest. Please login or register.
May 06, 2024, 09:30:15 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Electromechanical
| | |-+  Bally 1090 Eseries Problems 		0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally 1090 Eseries Problems  (Read 1786 times)
Jennasbetterhalf
Guest
« on: March 10, 2012, 07:54:53 PM »
Bought the  machine a month ago guy who sold said it was sitting for years unused. Powered up machine display read 88888888 (pulsing a bit) did several reset got machine to display normal and accept 5 coins spun reels then the 3rd reel would not stop. got wheel to stop tried to spin again first reel spun 2nd and 3rd stayed locked and after that
the reel solenoids would thump rhythmically thump.. thump.. thump.. So I was advised to clean the contacts with contact cleaner and oil the reel assembly so I did. In doing so I broke a pin on my ribbon cable that goes from the side board to the back board I then replaced it after replacing it and powering up all 3 reel solenoids, the coin diverter and the bell were all in on state buzzing loudly. The display read 8888888 at the time. I then checked out all connections that I had cleaned and found them all to be sound. I switched the ribbon cable around powered up and all the buzzing stopped and the display now displays nothing and doing reset also does nothing. Any thoughts?
 
Logged
FOXSSLOTS1
Resigned NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 323
Offline Offline

Gender: Male
Posts: 1239


Me at work
« Reply #1 on: March 10, 2012, 08:37:50 PM »
still sounds like you have the ribbon cable on incorrectly - you did reverse one end so it faces differently? 
Logged
Jennasbetterhalf
Guest
« Reply #2 on: March 10, 2012, 08:42:25 PM »
No I switched it end for end(one board to the other)
Logged
Jennasbetterhalf
Guest
« Reply #3 on: March 10, 2012, 08:47:52 PM »
could I  have fried the board when I hooked it up wrong?
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.088 seconds with 19 queries.