Complete or not?

[SilverFerret]

I purchased what was said to be a complete "Double Diamond 2000" program.
Long story short, it isn't working.
I'm wondering if it was advertised wrong and is supposed to have another SIMM card.
Buzz, this might be a question for you.
Below is the picture from the advertisement.
Thanks, Jim

[CVslots]

Can't read the labels, so hard to tell. If you can, add them to your post. You may have received a mismatched component.

[Buzz]

I can't read the labels but the count is correct, (3) simms and (3) eproms

I0001109 MD Base
G0001733 Game 1 and 2
C0000927 CGF  Simm
    "         PXL      "
DSS00284  Sound Simm

You may have a different version than the one above, but it's the only version I have.

On the PXL simm make sure the dip switches are ON ON ON OFF.( this won't cause the game not to play but sound simm all dip switches are OFF )  You already know to clean the simm contacts with a eraser.  If all else fails send me the game and I can check the checks sums with the simm and/or the eprom burner.

Jim Whats the game doing ?? You have my phone number.

[Yoeddy1]

When installed, what happens when you turn it on?

Jason

[PLUNGER BOY]

 The pic is from Rudys   PXLF C0000427  CCF C0000427  SNDF DSS00517   BASE 0000522  GME 1 & 2  0000778  This looks like what you have . P.B.

[Buzz]

Someone with a better list than I have is going to have to look it up.

As I recall the game sucks anyway !!!!!!!!!!!!!!!!!!!!  I wounder how many folks I pissed off by saying that ?   

[CVslots]

Are me and Buzz the only blind ones here???? How the heck did you see those numbers P.B.????

[PLUNGER BOY]

 ROZ. I used my  EXTRA THICK glasses

[Yoeddy1]

Someone with a better list than I have is going to have to look it up.

As I recall the game sucks anyway !!!!!!!!!!!!!!!!!!!!  I wounder how many folks I pissed off by saying that ?   

Yeah, it blows...but hey, that's just my opinion.

Jason

[Buzz]

Are me and Buzz the only blind ones here???? How the heck did you see those numbers P.B.????

For a Old broad you take a lot for granted calling me blind !!!!!!!!!!!!  I see just fine, other than the fact that somethings things are just a little blurry. Well maybe more than sometimes. Well maybe more than a little blurry. But I can see GOOD.

When  posted about dip switch setting on simms maybe I should clear that up. First off a game may only have one PXL simm and up to (3) of them. Each PXL simm will have a different dip switch setting, it's my understanding it's those dip switch setting that tells the machine which simm is which. I got these instructions from Eric when I bought the burner and I don't think he will mind my sharing it. But in a nut shell the     first simm (2 of ?) will be ON ON ON OFF
                                                          Second simm (3 of ?) OFF ON ON OFF
                                                          Third simm ( 3 of 4) ON OFF ON OFF
                                                           Sound simm are always all OFF

[CVslots]

Are me and Buzz the only blind ones here???? How the heck did you see those numbers P.B.????

For a Old broad you take a lot for granted calling me blind !!!!!!!!!!!! 

An OLD broad HALF your age....

Isn't about time for you to get another shot in your eye???

[Buzz]

Are me and Buzz the only blind ones here???? How the heck did you see those numbers P.B.????

For a Old broad you take a lot for granted calling me blind !!!!!!!!!!!! 

An OLD broad HALF your age....

Isn't about time for you to get another shot in your eye???

What the hell, did you and I get married and no one told me ??? I've got one Wife too many now !!!!!!! Guess I'm going to have to move to Utah. Now I guess I pissed off the Mormons, the Frogs are going to be next. If I miss anyone pm me and I'll see what I can do.

Was suppose to get a shot last week but I was in Boise and the DOC didn't have a long enough needle to poke me that far away.

[CVslots]

Are me and Buzz the only blind ones here???? How the heck did you see those numbers P.B.????

For a Old broad you take a lot for granted calling me blind !!!!!!!!!!!! 

An OLD broad HALF your age....

Isn't about time for you to get another shot in your eye???

What the hell, did you and I get married and no one told me ??? I've got one Wife too many now !!!!!!! Guess I'm going to have to move to Utah. Now I guess I pissed off the Mormons, the Frogs are going to be next. If I miss anyone pm me and I'll see what I can do.

Was suppose to get a shot last week but I was in Boise and the DOC didn't have a long enough needle to poke me that far away.

It was really just a blind joke, but nice to see you took it as an order...Your gonna make someone one helluva husband some day! Apparently, not the current wife, but there's always hope...and theres always the dating sites, like eHarmony or Match.com. Heck, i think theres even one for "mature fellers", like you! I'd advise you to probably not try Christianmingle.com, they would never believe you anyway....

Ok, we're hi-jacking this poor guys thread...

[SilverFerret]

Thanks guys,
My daughter has a computer program with a bunch of IGT slots and we like to play that one together. When I saw it on Rudy's for $50, I couldn't pass it up.
Unfortunately, It's giving me confetti screen when I turn on the machine. Pretty sure I have everything in it's correct location.
Also, the red light is on at the front of the tray.
Might be sending it your way buzz. Maybe you can copy some useful files for yourself, as well as get me up and running.
Thanks, Jim

[Yoeddy1]

Confetti screen...usually that's a broken leg on an EPROM or the EPROM legs are not seated properly in the socket.  Backwards perhaps?  Might check em again and reseat them.

Jason

[Buzz]

No No No I don't think Christianmingle.com  is for me. I shouldn't say this on this forum but I promised more folks pissed off so here goes and this isn't a BS story.

 My Wife is a Bible Thumper, when we first got married I went to church with her and couldn't believe what I was seeing. These folks were talking in the tongue and jumping up and down like the Watusi Tribe in Africa. I mean these people was really working them selves into a frenzy. Now I'm looking around wondering how pissed off she's going to get if I walk out, so I stayed to the end. At one point I sat down for the sermon and the Preacher telling me what a low life I am. Nope didn't happen, the only sermon I heard was " We have got to get more members " I guess more members means more money.  I never went back to that Church. The Eagles Nest Church Santa Anna CA.

[cowboygames]

Sounds like a Pentecostal church. My wife's got a cousin in AL that goes to one of those and the priest at the hospital last year when Uncle Jimmy fell down the steps at the family reunion in ND spoke in tongues. Sounded like a bunch of shit he made up as he went. They can keep it. I was raised Catholic and I thought WE were extreme.

And Uncle Jimmy died, so I guess GOD don't speak the language either

[Buzz]

Confetti screen...usually that's a broken leg on an EPROM or the EPROM legs are not seated properly in the socket.  Backwards perhaps?  Might check em again and reseat them.

Jason

Jason That above statement isn't necessarily chiseled in stone. Just today I was putting together Cops N Donuts using (3) IGT original PXL simms, I noticed that PXLF4  didn't have any dip switches. I thought maybe IGT knew more than I did, so I put it on the board and I got a Confetti screen. This particular board I'm not sure of so moved all the software to a different board and got the same results Confetti screen. Ended up burning a replacement PXLF4 simm and now the game plays fine.

Jason Today I found the perfect game for you, Lock N Roll, it's got to be the worst  I Game that IGT ever made. What a waste of good software. About five minutes of playing that sorry game, simms and eproms went to the eraser.

[CVslots]

Confetti screen...usually that's a broken leg on an EPROM or the EPROM legs are not seated properly in the socket.  Backwards perhaps?  Might check em again and reseat them.

Jason

Jason That above statement isn't necessarily chiseled in stone. Just today I was putting together Cops N Donuts using (3) IGT original PXL simms, I noticed that PXLF4  didn't have any dip switches. I thought maybe IGT knew more than I did, so I put it on the board and I got a Confetti screen. This particular board I'm not sure of so moved all the software to a different board and got the same results Confetti screen. Ended up burning a replacement PXLF4 simm and now the game plays fine.

Jason Today I found the perfect game for you, Lock N Roll, it's got to be the worst  I Game that IGT ever made. What a waste of good software. About five minutes of playing that sorry game, simms and eproms went to the eraser.

Hey, but I got the top glass for Lock n Roll if you decide otherwise!!!! I 'll make you a heckuva deal!!!!

[Buzz]

Let me put it this way, if Lock N Roll was the only slot mchine I could get I would just change my hobby and go back to watching porn.

[CVslots]

Let me put it this way, if Lock N Roll was the only slot mchine I could get I would just change my hobby and go back to watching porn.

Oh gosh, does that mean we all have 2 hobbies really?

[Buzz]

Playing a Slot machine or watching Porn, you can bet your butt someone is gonna get screwed !!!!!!!!!!!!!!!!!!

[slotsteve]

Confetti screen...usually that's a broken leg on an EPROM or the EPROM legs are not seated properly in the socket.  Backwards perhaps?  Might check em again and reseat them.

Jason

Jason That above statement isn't necessarily chiseled in stone. Just today I was putting together Cops N Donuts using (3) IGT original PXL simms, I noticed that PXLF4  didn't have any dip switches. I thought maybe IGT knew more than I did, so I put it on the board and I got a Confetti screen. This particular board I'm not sure of so moved all the software to a different board and got the same results Confetti screen. Ended up burning a replacement PXLF4 simm and now the game plays fine.

Jason Today I found the perfect game for you, Lock N Roll, it's got to be the worst  I Game that IGT ever made. What a waste of good software. About five minutes of playing that sorry game, simms and eproms went to the eraser.

go to harrahs in nc and see the people waiting to get on those lock and roll games  they love them there,  p.s we have lock n rolls for sale here 4 at a time 300 each , easy change to poker/game king 3902 boards

[Buzz]

go to harrahs in nc and see the people waiting to get on those lock and roll games  they love them there,  p.s we have lock n rolls for sale here 4 at a time 300 each , easy change to poker/game king 3902 boards

Steve 300 dollars each seems like a fair price, but let me ask you how much do you get for a Chop Top I Game like say Hexbreaker, Hoot Loot, Little Green Men, something along those lines ??

I would rather not comment about the folks in North Carolina. I try not to piss people off on a Sunday, tomorrow I could care less. I was in North Carloina once for a NASCAR race. Stayed in a Motel 6 in Winston Salem, NC  had to be the first Motel 6 ever build and hadn't been remodeled in 40 years. Damn it was BAD and the black hookers were working the street out in front of it. ( NO Roz I had my Wife with me )

[slotsteve]

I,m lucky  in 5 miles north of the nc line in va  48 miles from Winston /salem  nice to know about those black hookers , we only go to Winston salem in daylight hours  I have some games light neon nights, state fair,  that I would sell for 650 I,ll take some pics today  of what I can get too