|
Title: Comparitor works fine BUT only when the rake is wedged OUT. Help ! Post by: gordy on May 07, 2013, 09:12:22 AM CC-16 24v for an S+. Tried in three S+ machines. Since the rake is always in the out position , extra coins have to go directly into the hopper. Take out the wedge and no coins are accepted. Have several of these with the same problem. Resoldered all contacts. Would appreciate knowing the fixes. Gordy
Title: Re: Comparitor works fine BUT only when the rake is wedged OUT. Help ! Post by: stayouttadabunker on May 07, 2013, 03:23:37 PM You may have to replace a possible shorted capacitor on the CC board at location C3?
That stores/controls the power to the rake solenoid. JIM has a better understanding of CC schematics than I. Maybe he'll pop up here and give you a hand? Title: Re: Comparitor works fine BUT only when the rake is wedged OUT. Help ! Post by: BR549 Auto Sales on May 07, 2013, 05:53:38 PM Get in touch with Jim at Midwest Slots, he is a member here, he just repaired some S+ coin issues for me and he will get you going in the right direction.
Title: Re: Comparitor works fine BUT only when the rake is wedged OUT. Help ! Post by: gordy on May 08, 2013, 11:18:36 PM Checked that large cap on both. One tested "good" and the other tested "compare ".
|