Welcome, Guest. Please login or register.
May 17, 2024, 12:43:49 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  HOW DO I CLEAR A REEL 5 TILT ???		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: 1 2 [3] 4 Go Down Print
Author Topic: HOW DO I CLEAR A REEL 5 TILT ???  (Read 24309 times)
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #50 on: November 05, 2011, 03:40:06 PM »
i cant believe all these errors..... was due to that little metal roller in the cash box door wasnt making contact......i want to thank everyone on here everyone gets  +1 (Karma, or whatever) karma applause applause
Logged
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #51 on: November 05, 2011, 04:25:59 PM »
Quote from: staz on November 05, 2011, 03:40:06 PM
i cant believe all these errors..... was due to that little metal roller in the cash box door wasnt making contact......i want to thank everyone on here everyone gets  +1 (Karma, or whatever) karma applause applause

Staz,

This is why most people at home disable this switch and bypass it by tying the wires together.  propeller

CH CaptainHappy
Logged
  Come sail away, Come sail away Come sail away with me..
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #52 on: November 05, 2011, 05:12:20 PM »
still getting same errors  Scratch Head Scratch Head  are these the 2 wires i tie together?

* IMAG0066.jpg (538.45 KB, 2560x1440 - viewed 188 times.)
Logged
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #53 on: November 05, 2011, 05:20:51 PM »
i tied them together and still getting same errors ........i cant figure it out....... it worked foer a few spins and errors came back.....
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #54 on: November 05, 2011, 05:31:52 PM »
Does your machine have a belly door switch?
Logged
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #55 on: November 05, 2011, 05:35:03 PM »
no i never opened the belly door theres a lock on it.....
Logged
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #56 on: November 05, 2011, 05:36:37 PM »
Yes, those are the wires for the Bill Door Switch, just make sure they are tied together well and that no wire is exposed that can short to anything. Best to use a crimp connector or wire nut and cover with electrical tape.

You may want to check and reseat all top box connections, especially to the reel driver board...

CH CaptainHappy
Logged
  Come sail away, Come sail away Come sail away with me..
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #57 on: November 05, 2011, 07:42:50 PM »
i bypassed the cash box optics now im getting closure M and reel 5 tilt? whats closure M?
Logged
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #58 on: November 05, 2011, 08:19:18 PM »
whats this mean under input prossecer  my bill validater and main door flash 0 then 1 constantly?
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #59 on: November 05, 2011, 09:12:11 PM »
closure M means you have closed the main door.

I posted a long time ago, and recently a couple of times that bypassing that switch is not a good idea and will not affect trouble shooting if you make sure the switch is working when you close the BV door.

IGT coded the SG (Game Chips) so when the BV door opens it disables the machine, BV and shows the tilt "DOOR OPEN B" and when closed (no other issues) machine and BV are enabled.

This is what the machine is expecting concerning that switch and the cash can
home user                                     
You open main door (tilt shows on VFD) or belly door (tilt may show on VFD if belly door switch installed -same as main door open)
You open BV door (switch opens) machine disables game play, BV and displays BV door tilt       
remove cash can                           
do what ever you wanted to do with the cash can
install cash can
close BV door (switch closes)
you close main or belly door
machine enables game and BV

I have noticed when I bypassed mine shortly before I made the first post saying not to bypass the switch the machine took way longer to enable the BV.
« Last Edit: November 05, 2011, 09:17:27 PM by Foster » Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #60 on: November 05, 2011, 09:18:43 PM »
so any ideas what i should do? im so lost should i reconect the wires back on the cash box door?
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #61 on: November 05, 2011, 09:47:16 PM »
Yes, since it don't seem to be the problem.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #62 on: November 05, 2011, 11:18:34 PM »
i just cant figure out whats left to check...... all connections on top wheel are secure, i swapped out mpu's same error codessh up.......im leaning its the reel motor but why would it work for a little bit today.......th stop working again... Scratch Head Scratch Head
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #63 on: November 05, 2011, 11:23:14 PM »
Staz  Try opening and closing the main door latch 6 or 7 times. You don't have to swing the door open, just lift the latch and then close it.  Might not help but worth a try.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #64 on: November 06, 2011, 12:06:01 AM »
thanks buzz i tried no luck, but i did try something that worked i felt behind the top box on the molex connector hanging down..... as the machine was powering on i sqweezed on the molex connector and the wheel started moving normal i let go of it and it went back to shaking.......so i unplugged it and replugged it and applied some pliers to it and wammoooo my machines working again....... i spent from 11 last night till 4 in the morning then 8am today till 10 tonite on this damm machine im soo tired i just hope this solved the problem......its running good now.........again thanks to you guys i fixxed this.......id be lost without you guys......
Logged
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #65 on: November 06, 2011, 12:24:17 AM »
I figured that one of the many top box connections was going to be the culprit! yes Glad that you are up and rolling!!! applause Clap donut

Wheel all agree that you were sure sad that you could not play your super cool toy! Silly Me!

CH CaptainHappy
Logged
  Come sail away, Come sail away Come sail away with me..
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #66 on: November 06, 2011, 12:31:11 AM »
i need help i was actually really sad lol...... my friends called me up tonite to go clubbing and i blew them off to fix this machine....... i was determined....lol
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #67 on: November 06, 2011, 01:04:50 AM »
Congradulations Staz! Glad ya got er whipped! Clap Clap +1 (Karma, or whatever)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #68 on: November 06, 2011, 03:21:18 AM »
I loose, hanging Molex connection...
Zip tie it up to the reel cage so it doesn't come off again!
Logged
shivwitts
New NLG Member 1 to 100 Post
**

Total Karma Storms: 4
Offline Offline

Posts: 37
« Reply #69 on: November 07, 2011, 06:38:23 PM »
Good job Staz!
Logged
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #70 on: November 07, 2011, 11:19:06 PM »
okay here we go again Silly Me! i turned my machine on and the same thing happened...... hissy fit i snapped lol...... Duh! i took appart the top again......i was paying all my attention to the molex connector which seemed fine and secure so im jiggleing the wires in the back as i have the machine turned on...... i come across this other black little box with  wires wrapped around it  leaning against the back of topbox.... i move it away from the metal panel in the back of the top box while the wheel is shaking and BOOM..... it starts moving like its suppose to......whats the use of this? its something to do with static something........ its like black and it just was dangleing with wires wrapped on it...... WHY WOULD IT CAUSE A REEL TILT 5 EVERY TIME IT TOUCHED THE BACK OF THE TOPBOX????????? i straped it away from the back panel and now machine working fine again......
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #71 on: November 07, 2011, 11:23:24 PM »
Post a picture Staz, sounds like an external power supply for something. Maybe it doesn't even need to be there and it hanging from the wires is pulling on something else
Logged
staz
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 156
Offline Offline

Posts: 1567
« Reply #72 on: November 07, 2011, 11:59:58 PM »
heres a pic the black box with wires wrapped around it......

* IMAG0067.jpg (365.08 KB, 2560x1440 - viewed 212 times.)
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #73 on: November 08, 2011, 12:03:49 AM »
That's suppose to be there, it's a choke. Should be plastic coated though and touching the metal case of the game shouldn't hurt anything. You've still got a bad connection:(
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872
« Reply #74 on: November 08, 2011, 12:04:24 AM »
That black part is a ferrite core.
The wires being wrapped in and around it creates a noise filter,
There is also one on the cabinet I/O to back lit reel light controller harness (it is near the cabinet I/O)

I am thinking you have a loose connection, broken wire, exposed wire (damaged insulation) or the like going on you moving it around fixed the issue.
I would investigate why it fails in the original position but works where it is now.
Logged
A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Pages: 1 2 [3] 4 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.097 seconds with 19 queries.