S2000 Multi Denom Mini to micro Fit molex adapter

[stayouttadabunker]

yeah! lol
DONE!
Because of the tremendous difficulty of constructing these micro-sized PicoFit harnesses -
I will not be making any more!
It took me nearly 4 hours to make these! Arghhh!!
I will be mailing these out to you Monday morning Morspeed.

[StatFreak]

yeah! lol
DONE!
Because of the tremendous difficulty of constructing these micro-sized PicoFit harnesses -
I will not be making any more!
It took me nearly 4 hours to make these! Arghhh!!

So that means that you earned ½ a token for each of the first two hours and ½ a quarter for each of the last two hours.
Can I hire you?

[Forrhouse]

Nice Job.
For reference can you post the part number of the PicoFit Molexes.
That's good info to have on hand.
Thanks
Eric

[morspeed]

Awesome Bunker! Your the man!  I can't wait!

[a69mopar]

Hey Bunker,
  I could use 27 of those, let me know if you start making them again.  Nice job by the way.

Thanks,
Wayne

[stayouttadabunker]

Here's the links to the parts for the 11-pin housings and the receptor pins>>>

http://www.mouser.com/Search/ProductDetail.aspx?R=51021-1100virtualkey53810000virtualkey538-51021-1100


http://www.mouser.com/Search/ProductDetail.aspx?R=50079-8000virtualkey53810000virtualkey538-50079-8000

You guys make your own!!! lol
I never had a crimper small enough so I soldered Morspeed's.
You will need a magnifying lamp and steady hands...lol

[a69mopar]

You know you want to Mark...    just gives you an excuse to buy a micro crimper..
W

[stayouttadabunker]

You're an evil, evil man Mopar!!! 
Somehow you instilled these thoughts into my mind and I went shopping around.... 
I've found that even my smallest crimpers (which are crimpers for small jewelry) doesn't just cut it....argh!!!
I need a PicoBlade crimper...impossible to find....
Mouser does sell PicoBlade kits but only with solder termination and not the ones I like to use which need a tiny crimper.
I know the model aircraft guys have them for making connections with miniature servos.
Of course, they're only using 2-pin  or 4-pin PicoBlade housings.
Below is the red-handled Molex crimper I need but believe me- they're not cheap...
I have some of these tools but the hand crimpers are amazingly expensive.>>>

http://www.molex.com/molex/products/datasheet.jsp?part=active/0638190300_APPLICATION_TOOLIN.xml&channel=Products&Lang=en-US

http://www.mouser.com/catalog/catalogUSD/641/2125.pdf

[stayouttadabunker]

The blue ones are too cheap and don't really work.
The red ones are discontinued.
This one pictured below is available but is like over $200...yeah right.
I think I'll stick to soldering...

[Forrhouse]

Thanks for the connector info Mark.    
Eric

[StatFreak]

The blue ones are too cheap and don't really work.
The red ones are discontinued.
This one pictured below is available but is like over $200...yeah right.
I think I'll still to soldering...

What about the one that's $837?!      For a HAND tool??! What are they on? 

[a69mopar]

The blue ones are too cheap and don't really work.
The red ones are discontinued.
This one pictured below is available but is like over $200...yeah right.
I think I'll still to soldering...

This one would be best and it does 4 wire sizes.  I don't think the price is that bad, however to make only a couple wouldn't be worth it.

Thanks,
Wayne

[stayouttadabunker]

Hey Morspeed!
Did it ever work? 
Can you show me a picture of how you have it all hooked up? 

[morspeed]

Hey Mark,

I thought I told you?? Oh well one of the wires came loose on one of them in shipping but I think I got it soldered back. and yes it worked! I will send pictures later when I get home.

[stayouttadabunker]

One of the wires came loose?  
Gee...I must be not that good of a harness maker! lol
I'm glad it works anyways! 
Yeah! I wanted to see how you got it all hooked
up on the back of the door there... 

[stayouttadabunker]

I am of understanding that only certain chips support the Multi-Denomination Touch Pad.
Anybody know which ones besides the SG00621?  
I'm using the SG00363's but all I get is the "7-Segment Display Mismatch" Touch Pad error.
I tried SG00380's too...
The 6-6-3 Display works but the Touch Pad only lights up and doesn't change the denom value
even though I keychipped it and set each one.  
Am I missing a step in set-up procedures?
From the SB00363 PSR sheet below.
Click on instructions to make larger if needed>>>

[Ron (r273)]

I am of understanding that only certain chips support the Multi-Denomination Touch Pad.
Anybody know which ones besides the SG00621?  
I'm using the SG00363's but all I get is the "7-Segment Display Mismatch" Touch Pad error.
I tried SG00380's too...
The Display works but the Touch Pad only lights up and doesn't change the denom value
even though I keychipped it and set each one.

You have to change the segment display in the key chip menu. As usual I don't remember
the key Chip number.

Ron (r273)

<edit> 7.2.7  7-Segment Display.

[morspeed]

363's will work with multi denom touch. That is what I am using. I know there are some others as well. I will have to check later. I never got a chance last night for a pic for you but I will get it. I modified my original short reel glass mount because I was too cheap to buy a new one when I could make this one work for me. Kinda rigged but hey it works so why not??
Tommy

[stayouttadabunker]

You have to change the segment display in the key chip menu. As usual I don't remember
the key Chip number.
Ron (r273)

I did...
I changed it from 5-5-2 to 6-6-3...hmm...

[stayouttadabunker]

363's will work with multi denom touch. That is what I am using. I know there are some others as well. I will have to check later. I never got a chance last night for a pic for you but I will get it. I modified my original short reel glass mount because I was too cheap to buy a new one when I could make this one work for me. Kinda rigged but hey it works so why not??
Tommy

Thanks Tom!
 I really need to see that hook up.
I played with mine for a couple of hours last night but kept coming up the the error.
I will try again in a few hours.
Anyone who's seen these harness can attest to how delicate they are.
I have to check mine to see if any of the pins came out of the tabs on the Molex housing.
That can happen when pushing these micro connectors in and out.

Oh! Before I forget...lol
I need one of those colored Touch Pad plastic insert stickers
with four various denoms if anyone has one? Thanks!
penny to a dollar or .25cents to whatever...

[morspeed]

Bunker,

I think when I switched it originally I got the same error. I either key chipped it reconfigured netplex devices to get it to accept the new display. I would try to reconfigure netplex first.
Tommy

[stayouttadabunker]

Bunker,

I think when I switched it originally I got the same error. I either key chipped it
 reconfigured netplex devices to get it to accept the new display. I would try to reconfigure netplex first.
Tommy

Thanks...I'll try it when I get home   

[Ron (r273)]

363's will work with multi denom touch. That is what I am using. I know there are some others as well. I will have to check later. I never got a chance last night for a pic for you but I will get it. I modified my original short reel glass mount because I was too cheap to buy a new one when I could make this one work for me. Kinda rigged but hey it works so why not??
Tommy

Thanks Tom!
 I really need to see that hook up.
I played with mine for a couple of hours last night but kept coming up the the error.
I will try again in a few hours.
Anyone who's seen these harness can attest to how delicate they are.
I have to check mine to see if any of the pins came out of the tabs on the Molex housing.
That can happen when pushing these micro connectors in and out.

Oh! Before I forget...lol
I need one of those colored Touch Pad plastic insert stickers
with four various denoms if anyone has one? Thanks!
penny to a dollar or .25cents to whatever...

[/color]

If I remember correctly you have to have one in place, before it will work.

Ron (r273)

[stayouttadabunker]

Oh! Before I forget...lol
I need one of those colored Touch Pad plastic insert stickers
with four various denoms if anyone has one? Thanks!
penny to a dollar or .25cents to whatever...

[/color]

If I remember correctly you have to have one in place, before it will work.

Ron (r273)

Okay...
I didn't know that.
It must be some type of magnetic plastic?
I just stuck the brown touch pad against the back of the reel glass for now.
My finger actually touches the front of the reel glass - not the actual touch pad brown contact areas.

I found this test for the panel lights on the touch pad...
Click to make larger if needed>>>

[morspeed]

363's will work with multi denom touch. That is what I am using. I know there are some others as well. I will have to check later. I never got a chance last night for a pic for you but I will get it. I modified my original short reel glass mount because I was too cheap to buy a new one when I could make this one work for me. Kinda rigged but hey it works so why not??
Tommy

Thanks Tom!
 I really need to see that hook up.
I played with mine for a couple of hours last night but kept coming up the the error.
I will try again in a few hours.
Anyone who's seen these harness can attest to how delicate they are.
I have to check mine to see if any of the pins came out of the tabs on the Molex housing.
That can happen when pushing these micro connectors in and out.

Oh! Before I forget...lol
I need one of those colored Touch Pad plastic insert stickers
with four various denoms if anyone has one? Thanks!
penny to a dollar or .25cents to whatever...

[/color]

If I remember correctly you have to have one in place, before it will work.

Ron (r273)

Did you find a denom sticker bunker? Which one do you want I have a bunch of them. Not alot of small denom left though. Let me know.
Tommy